517791
32
Zoom out
Zoom in
Previous page
1/45
Next page
32 GB/MT
©
Installing the LCD
radio-controlled clock
Note: You will need a drill, suitable assembly
material and a screwdriver for installation.
CAUTION! DANGER TO LIFE AND RISK
OF INJURY; RISK OF DAMAGE TO PROP-
ERTY! Please read the operating and safety instruc-
tions for your drill carefully.
WARNING!
DANGER TO LIFE! Please
ensure that you do not drill into any electrical wiring,
gas or water pipes in the wall. If necessary, carry out
checks with a wire, pipe and stud detector before
you drill into a wall.
Find a suitable place to install the radio-controlled
clock.
˽ Mark the drill hole on the wall.
CAUTION! DANGER OF INJURY! Refer to
the operating instructions for your electric drill.
˽ Drill the hole with a drill.
˽
Insert a suitable dowel into the drill hole.
˽ Use a screwdriver to insert a suitable screw.
Hang the radio-controlled clock on the screw
using the mount
17
.
Inserting or replacing batteries
The battery symbol
3
appears in the LC dis-
play if the batteries are too weak. Make sure you
replace the batteries at the earliest opportunity.
The radio-controlled LCD wall clock starts to receive
the radio time signal as soon as the batteries are
inserted.
Note: Do not alter the position of the radio-controlled
clock during reception of the signal. This may disrupt
reception.
Radio time signal (DCF):
The DCF signal (time signal transmission) consists
of time pulses broadcast from one of the most accu-
rate clocks in the world. It is situated near Frankfurt /
Main, Germany.
Your radio-controlled clock receives these signals
under ideal conditions up to a distance of approx.
1,500 km around Frankfurt / Main. Reception of the
radio signal generally takes approx. 3–10 minutes.
If it does not work properly, restart the radio-
controlled clock. To do this, keep the WAVE
button
21
pressed for approx. 3 seconds.
Reception can be considerably impaired by obstacles
(e.g. concrete walls) or sources of interference (e.g.
other electrical devices). If necessary, change the
location of the radio clock (e.g. by putting it near a
window) if you have problems with reception.
©
Operation
©
Reception of DCF radio signal
The radio-controlled clock automatically starts to
search for the DCF radio signal. The radio icon
2
on the LCD indicates that the clock is searching for the
radio signal.
Note: Reception of the radio signal may be seriously
disrupted in reinforced concrete buildings (see “Set-
ting up Devices”).
It is also possible to start reception of the DCF radio
signal manually on the clock.
Press and keep pressed the WAVE button
21
for longer than 3 seconds. The LCD radio-con-
trolled wall clock attempts to receive the DCF
radio time signal. This process takes several
minutes and is indicated in the LC display by a
flashing radio symbol
2
.
Note: If the radio-controlled clock cannot pick up
the DCF radio signal on account of an error or the
distance from the transmitter, etc., it is also possible
to set the time manually. As soon as reception of
the DCF signal is successful, the manual settings
are overwritten.
Before Initial Use / Operation
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Auriol Z30237B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Auriol Z30237B in the language / languages: Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Auriol Z30237B

Auriol Z30237B User Manual - English - 42 pages

Auriol Z30237B User Manual - German - 23 pages

Auriol Z30237B User Manual - German - 42 pages

Auriol Z30237B User Manual - Dutch - 23 pages

Auriol Z30237B User Manual - Danish - 42 pages

Auriol Z30237B User Manual - French, Italian - 23 pages

Auriol Z30237B User Manual - Swedish, Finnish - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info