Manual Auriol Z29536 - IAN 55982 (page 8 of 53) (English, Danish, Swedish, Finnish)

563957

Zoom out

Zoom in

1/53

8 GB/IE

Before Initial Use / Operation

chronise with the atomic clock, you can also carry

out the clock adjustments manually (see “Setting the

Date / Language / Time / Time Zone Manually”).

Radio Signal (DCF):

The DCF signal (time signal transmitter) consists

of time pulses emitted by one of the most accurate

clocks in the world close to Frankfurt / Main, Ger-

many – this varies by 1 second in a million years.

Your weather station receives these signals under

ideal conditions up to a distance of approximately

1500 km around Frankfurt / Main. Reception of

the radio signal usually takes about 3 - 10 minutes.

j If your weather station is not working correctly,

please perform a new start by pressing the

RESET button

Reception can be considerably impaired by

obstacles (e.g. concrete walls) or sources of

interference (e.g. other electrical devices). If

necessary, change the location of the radio clock

(e.g. by putting it near a window) if you have

problems with reception.

Operation

DCF Radio Signal Reception

After the establishment of a connection with the

outdoor sensor the weather station automatically

begins to search for the DCF radio signal. The

search is shown in the LC display by the radio

tower symbol

ﬂashing.

Note: During the signal search all of the function

buttons of the weather station are blocked.

Note: In buildings made of reinforced concrete

the reception of the radio signal may be severely

impaired (see “Setting up devices”).

In order to correct any deviations from the exact

time, the clock is automatically synchronised with

the DCF radio signal every day at 3 a.m. If the

synchronisation with the DCF radio signal fails,

the radio tower symbol

goes oﬀ. The clock

then attempts to synchronise with the DCF radio

signal at 4 a.m., 5 a.m. and 6 a.m.

Reception of the DCF radio signal can also be

started manually on the weather station.

j Press and hold down the

/ button

for 3 seconds. The weather station attempts

to receive the DCF radio signal. This process

takes several minutes and is indicated in the LC

display by a ﬂashing radio tower symbol

If the connection with the DCF radio signal cannot

be established, the search is stopped. A further

attempt to establish a connection is made auto-

matically on the next full hour.

Note: If the clock of the weather station cannot

receive the DCF radio signal due to errors, too great

a distance from the transmitter or similar reasons,

it is possible to set the time manually. As soon as

the DCF radio signal is successfully received, the

values that have been set manually are overwritten.

Setting the Date / Language /

Location / Clock / Time Zone

Manually

At the location site of the weather station, recep-

tion of the DCF radio signal may be impaired or

interrupted. In this case it is possible to adjust the

device manually.

Follow these steps:

1. Press and hold down the MODE button

for about 3 seconds. The hour value of the

time display

ﬂashes. Press the / but-

ton

and the / 12 / 24 button

to set

it to the desired value.

Tip: By keeping the

/ button

and

the

/ 12 / 24 button

pressed, you

accelerate the process and reach the desired

value more quickly. This quicker method can

also be used for making the other settings.

If during a period of 15 seconds no buttons

are pressed, the LC display returns automati-

cally to the default display.

2. Conﬁrm your settings by pressing the MODE

button

. The minute value of the time dis-

play

ﬂashes. Press the / button

and the

/ 12 / 24 button

to set it to

the desired value.

3. Conﬁrm your settings by pressing the MODE

button

. The second value of the time dis-

play

ﬂashes. Press the / button

or the

/ 12 / 24 button

to set the sec-

ond value to 0.

4. Conﬁrm your settings by pressing the MODE

button

. The year value ﬂashes in the time

display

. Press the / button

and

the

/ 12 / 24 button

to set it to the

desired value.

5. Conﬁrm your settings by pressing the MODE

button

. The month value of the date

display

ﬂashes. Press the / button

and the / 12 / 24 button

to set it

to the desired value.

6. Conﬁrm your settings by pressing the MODE

button

. The day value of the date display

ﬂashes. Press the / button

and

the

/ 12 / 24 button

to set it to the

desired value.

7. Conﬁrm your settings by pressing the MODE

button

. The language ﬁeld for the name

of the day of the week of the date display

ﬂashes. Press the

/ button

and the

/ 12 / 24 button

to set it to the desired

language.

Note: You have the choice of German,

English, Russian, Danish, Dutch, Italian,

Spanish and French.

Note: The weather station is supplied in the

default setting of German (GER).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Auriol Z29536 - IAN 55982 in the language / languages: English, Danish, Swedish, Finnish as an attachment in your email.

The manual is 1,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Auriol Z29536 - IAN 55982

Auriol Z29536 - IAN 55982 User Manual - German, Dutch, French, Italian - 45 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Auriol Z29536 - IAN 55982 Manual

Product: