Manual Auriol IAN 321597 - H13726 (page 31 of 88) (English, German, Dutch, French, Polish)

817946

Zoom out

Zoom in

1/88

31 GB/IE

Wind gauge assembly:

Choose a suitable location for your wind gauge.

– The wind gauge must be set up outdoors.

– The wind must be able to access the wind

gauge from all sides to enable the wind force

and wind direction to be measured accurately.

– Ensure that the vane and the wind wheel are not

blocked to guarantee accurate measurements.

– The wind gauge must be assembled within the

signal transmission range. Walls reduce the

transmission range. Check the signal reception

on the weather station before ﬁnal assembly.

Ideally, the wind gauge should be mounted on a

mast or roof of a house, where the wind can act

directly on the wind gauge.

A mast is required with a diameter of approx.

25–31 mm (not included) which stands stable and

vertical. Mount the wind gauge as shown below

with the hexagonal socket head bolt, washers,

mounting screws and nuts provided. After assembly,

ensure that the wind gauge is positioned horizon-

tally with a stable hold.

The wind gauge must be positioned horizontally to

guarantee accurate measurements.

Mounting clamp

Washer

Nut

Wind

wheel Hexagonal socket head bolt

Mast

Vane

Setting up the rain gauge:

Choose a suitable location for the rain gauge.

– The rain gauge must be positioned outdoors.

The product must not be impaired by objects

and obstructions. Do not position under trees or

next to walls.

– The rain must be able to fall on the rain gauge

without obstructions to achieve an accurate

rainfall measurement.

– Ensure that rain water does not accumulate under

the rain gauge. It must be able to ﬂow oﬀ freely.

– The rain gauge must be assembled within the

range of the signal transmission. Walls reduce

the transmission range. Check the signal reception

on the weather station before ﬁnal assembly.

When you have found a suitable position, ensure

that the surface is completely horizontal to guarantee

accurate rainfall measurement.

The rain gauge can simply be stood in the desired

position or ﬁxed with the screws provided.

1. Mark the drill holes using the rain gauge before

drilling the holes (ø 5 mm), ensure that no elec-

trical cables or water pipes can be damaged.

2. Push the supplied dowel into the drilled hole

until it is ﬂush with the wall.

3. Fix the rain gauge with the screws provided.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Auriol IAN 321597 - H13726 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 6.19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Auriol IAN 321597 - H13726 Manual

Product: