732050
13
Zoom out
Zoom in
Previous page
1/83
Next page
- 11 -
Activating or deactivating the alarm
The slide switches AL1 -29 and AL2 -28 can be used to activate (ON) or deactivate (OFF) both alarms
separately.
If alarms are activated, the bell symbol and/or -15 for each alarm will appear on the display.
When the alarm sounds, if it is not turned off within 2 minutes, the alarm will stop automatically and sound again
after 24 hours.
Snooze feature (SNOOZE)
When the alarm sounds, press the SNOOZE/LIGHT-button 1 to temporarily stop the alarm. Z
Z
will blink on the
display and the alarm will sound again after 5 minutes.
Temperature unit
Press the MODE-button 21 1x long and 1x short to enter setting mode for °C or °F.
Now press the + -button 22 or - -button 23 to select the temperature unit Celsius (°C) or
Fahrenheit (°F).
Temperature warning
You may set a temperature warning with an upper and lower temperature limit by pressing and holding the - -
button 23 for 2 seconds. The upper limit (-15 - 50°C) will blink on the display and can be set by pressing the + -
button 22 or - -button 23. Confirm your setting by pressing the MODE-button 21. The lower limit (-20 - 50°C)
will blink on the display and can be set by pressing the + -button 22 or - -button 23. Confirm your setting by
pressing the MODE-button 21. If the temperature exceeds the upper limit or falls below the lower limit the
warning symbol will blink and an alarm will sound for the active or selected sensor channel.
Frost warning
If the outdoor sensor measures a temperature below +1 °C there is a danger of frost. The symbol
for the frost warning will blink and an alarm will sound. If the temperature is below -3°C for
a longer duration, the symbol for the frost warning will appear permanently.
NOTE: Even if the frost warning is not shown, when temperatures are near freezing there is always a danger
of frost and/or black ice. The outdoor sensor can only measure the temperature at the location at which it is
placed.
If using multiple outdoor sensors, the frost warning will only be active for the sensor with the lowest channel
number (1, 2 or 3).
Activating or deactivating the temperature and frost warnings
Press the - -button 23 once to activate the temperature alarm .
Press the - -button 23 again to activate the frost warning .
Press the - -button 23 again to activate the temperature and the frost warning.
Press the - -button 23 again to deactivate the temperature and the frost warning.
I
ndoor
-
/
outdoor
-
temperature
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Auriol 4-LD5210 - IAN 334272 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Auriol 4-LD5210 - IAN 334272 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info