717605

Auriol 4-LD5180-1 - IAN 314815-1904 Manual

15
Zoom out
Zoom in
Previous page
1/63
Next page
-
13
-
1 Time 7 ALARM1 button
2 Light/snooze 8 ALARM2 button
3 Date 9 MODE button
4 Radio control signal/DST 10 + - buttons
5 ALARM1 display 11 -/RCC OFF button
6 ALARM2 display 12 Foldable stand
Setup
Remove the protective film from the display of the alarm clock. Open the battery
compartment on the backside of the device and insert three 1.5V AAA R03/LR03
batteries in the correct polarity. Close the battery compartment.
Radio time signal reception starts automatically after inserting the batteries
and the alarm clock will beep once. The radio tower indicator 4 will blink on the
display. This process can take 3-10 minutes.
Note: Please do not move the alarm clock during the reception process.
The alarm clock synchronizes the internal clock every day from 02:15 to 03:15 on
each full hour. If reception is unsuccessful, the clock will reattempt reception at
04:15 and 05:15. If the reception of the time signal fails, the radio control
tower 4 will disappear from the display. Please set the time manually (see "Basic
settings").
If reception is successful, the radio tower indicator 4 appears permanently on the
display and the time, date and day of the week are set automatically. During
daylight saving time, DST appears on the display next to the radio tower
indicator 4.
Please set the time manually, if reception fails (see "Basic settings").
Time zone adjustment
If you are in a country in which the current time is incorrect even though the DCF77
signal was received, please use the time zone adjustment to adjust the time zone to
a different setting than the standard setting (UTC+1 = Central European Time). Set
the difference in hours (for example -01) to the required time zone.
Press and hold MODE 9 for 3 seconds in normal time display mode. The language
of the day of the week will blink. Press MODE 9 7x. Now the time zone will blink
(00) and can be set by pressing + 10 or -/RCC OFF 11.
Confirm your setting by pressing MODE 9. The radio tower indicator 4 will
disappear.
Press MODE 9 to select the day of the week, the zone or the seconds. The clock will
continue to receive the DCF77 radio control signal but will show the changed time in
ZONE mode (for example, 1 hour less).
Activating/ deactivating radio signal reception
Radio signal reception can be deactivated manually by pressing -/RCC OFF 11on
the backside of the clock for 4 seconds. The radio tower 4 will
disappear from the display. The radio waves are shown on the
display
.
… 15 …


Need help? Post your question in this forum.

Forumrules
1

Forum

auriol-4-ld5180-1---ian-314815-1904

Reset search

  • how to change to united states east coast time instead of west coast time ?
    Submitted on 21-6-2022 at 01:03

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Auriol 4-LD5180-1 - IAN 314815-1904 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Auriol 4-LD5180-1 - IAN 314815-1904 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info