Manual Auriol 4-LD4948 - IAN 296172 (page 7 of 26) (English, German, Dutch, French, Portuguese, Spanish)

694636

Zoom out

Zoom in

1/26

The alarm clock synchronizes the internal clock every day from 01:00 to 04:00 on each

full hour. If reception is unsuccessful, the clock will reattempt reception at 05:00 and

06:00. Please set the time manually, if reception fails (see "Basic settings").

If reception is successful, the radio tower indicator 5 appears permanently on the

display and the time, date and day of the week are set automatically. During daylight

saving time, DST appears on the display next to the radio tower indicator.

Time zone adjustment

If you are in a country, in which the clock displays the wrong time even though it can

receive the time signal, please use the time zone adjustment to use your alarm clock in a

time zone other than the standard time zone (UTC+1 = Central European Time). Set the

difference in hours (- 01 for example) to the desired time zone.

Press and hold SET 14 for 3 seconds in normal time display mode, the language of the

day of the week display will blink. Press SET 14 8 times to reach the time zone (00), then

press UP 18 or DOWN 17 to set the time zone. Confirm your setting by pressing SET 14.

Restart radio reception after changing this setting. Your clock receives the DCF77 time

signal but will show the adjusted time (1 hour less for example).

Restarting radio reception

Press and hold RCC 16 on the backside of the alarm clock for 4 seconds to restart radio

time signal reception. Please set the time manually if reception fails (see "Basic settings").

The radio tower indicator 5 will blink on the display. This process can take 3-10

minutes.

Reception problems

The DCF77 radio signal is transmitted from a location near Frankfurt am Main and can

be received within a radius of approximately 1500 km around Frankfurt am Main.

However, there are some obstacles and sources of interference, which may substantially

hinder reception. If your alarm clock does not correctly receive the DCF77 radio signal,

please hang or place the alarm clock a different location at your site. Please note that

devices such as computers, telephones, radios and televisions may cause

electromagnetic radiation which can interfere with the DCF77 signal reception. Other

possible detriments to reception are: strong building insulation (metal building materials),

nearby mountains or atmospheric interference. It may also be necessary to replace the

batteries.

Light

Press SNOOZE/LIGHT 2 the case downward from above to briefly activate the

backlight.

Temperature display

Press SET 14 to select the temperature unit Celsius (°C) or Fahrenheit (°F).

Speed setting

Press and hold buttons when setting numerical values to use the speed setting feature.

Basic settings

The following settings are adjustable: Language of the day of the week, 12/24-hour

time format, date, time and time zone.

Press and hold SET 14 for 3 seconds in normal time display mode. The language of the

day of the week will blink on the display. Set the language by pressing UP 18 or

DOWN 17. The following languages are selectable: GE=German, EN=English,

IT=Italian, FR=French, DU=Dutch, SP=Spanish, HU=Hungarian, SL=Slovenian. Press

SET 14 to confirm your setting. Set the12/24-hour time format, the year, the date format

(M=month, D=date), the month, the day, the hours, the minutes and the time zone

adjustment in the same way.

Alarm

The alarm has 2 separate adjustable alarm times. Use Alarm 1 (1-5) for Monday to

Friday. Use Alarm 2 (6-7) for Saturday and Sunday.

Press and hold ALARM15 to enter alarm time setting mode. The hour display for alarm 1

(1-5) will blink on the display. Press UP 18 or DOWN 17 to set the hour and confirm

your setting by pressing ALARM 15. Set the minutes for alarm 1 and the hours and

minutes for alarm 2 (6-7) in the same way.

Press UP 18 in normal time display mode to activate or deactivate alarm 1 (1-5).

Press DOWN 17 in normal time display mode to activate or deactivate alarm 2 (6-7).

The bell symbol will appear if the alarm is activated.

Snooze

Press SNOOZE/LIGHT 2 on the top of the case to use the snooze feature. The light

activates briefly, z

and the bell symbol blink on the display. The alarm sound will stop for

about 8 minutes and then restart.

Cleaning instructions

Clean the alarm clock with a soft, dry and lint-free cloth. A glasses cleaning cloth is ideal.

Simplified EU declaration of conformity

Hereby, digi-tech gmbh declares that the radio equipment type 4-LD4948 is in

compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity

is available at the following internet address:

http://www.digi-tech-gmbh.com/ce/296172_WE.pdf

Disposal of the electronic appliance

This alarm clock may not be disposed of with normal household waste. Dispose

of the alarm clock at an approved disposal facility or at your local recycling

centre. Please observe the current rules and regulations when disposing of the appliance.

Contact the disposal system if in doubt.

Disposal of the batteries

Please dispose of your batteries properly in containers especially set up at

retailers. Batteries do not belong in household waste. Dispose of the batteries at

an approved disposal facility or at your local recycling centre. Contact the disposal

system if in doubt.

digi-tech gmbh warranty

This alarm clock includes a 3 year warranty starting on the day of purchase. In case of

defects of this alarm clock you have, by law, certain rights regarding the vendor of the

alarm clock. These rights are not changed by the warranty which is described in the

following paragraphs.

Warranty conditions

The warranty duration starts on the date of purchase. Please keep the original receipt in a

safe place. The receipt is needed as a proof of purchase. If a defect occurs in the alarm

clock within 3 years, the alarm clock will be repaired or replaced (according to our

choice) free of charge. This warranty requires that, within the 3 year warranty period, the

alarm clock and the receipt can be made available to us along with a short written

description of the defect and when it occured. If the defect is covered by the warranty,

you will receive the repaired alarm clock or a new alarm clock. Repair or replacement

does not cause the warranty period to restart.

Warranty period and defects liability

The warranty period is not increased by the defect liability. This also applies to repaired

or replaced parts. If defects are noticed at the time of purchase they must be reported

immediately upon unpacking the item. Paid repair may be available after the end of the

warranty period.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Auriol 4-LD4948 - IAN 296172 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Auriol 4-LD4948 - IAN 296172 Manual

Product: