659606
5
Zoom out
Zoom in
Previous page
1/17
Next page
-
7
-
Setup
Open the battery compartment on the backside of the device and
insert one 1.5 V AA R6/LR6 battery in the correct polarity. Close
the battery compartment.
The hands of the alarm clock will now move to the 11:00:00,
3:00:00 or 7:00:00 o'clock position and stop. The alarm clock
will now begin to receive the DCF 77 radio time signal. This
process will take around 3 to 10 minutes.
Note: Please do not move the alarm clock during the reception
process.
If the radio time reception attempt is successful, the hands will
automatically move to the correct position and the correct date
will be set. If the reception attempt fails, the clock will restart the
reception attempt hourly and the hands will stay in the reception
position. After 8 failed reception attempts the alarm clock will stop
attempting to receive the signal and the time must be set manually.
Reception problems
The DCF77 radio control signal is transmitted from a location near
Frankfurt am Main and can be received at a distance of up to
1500 km. However, there are some obstacles and sources of
interference, which may substantially hinder reception. If your
alarm clock does not correctly receive the DCF77 radio signal,
please hang or place the alarm clock in a different location at
your site. Please note that devices such as computers, telephones,
-
8
-
radios and televisions may cause electromagnetic radiation which
can interfere with the DCF77 radio signal reception. Other
possible detriments to reception are: strong building insulation
(metal building materials), nearby mountains or atmospheric
interference. It may also be necessary to replace the batteries.
Restart
Press the REC button on the backside of the alarm clock for 4
seconds to restart radio time signal reception. The hands of the
alarm clock will now move to the 11:00:00, 3:00:00 or 7:00:00
o'clock position and stop. The alarm clock will now begin to
receive the DCF 77 radio time signal.
If radio time signal reception is not possible, the time must be set
manually.
Manual time setting
If radio time signal reception is not possible, the time can be set
manually:
Press and hold SET for 4 seconds.
Press SET briefly to move the hands forward by 1 minute.
Press and hold SET to use speed setting.
If the SET button is not pressed for 8 or more seconds, the alarm
clock will exit setting mode and the set time will be activated.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Auriol 4-LD4537 - IAN 282632 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Auriol 4-LD4537 - IAN 282632 in the language / languages: English, German as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Auriol 4-LD4537 - IAN 282632

Auriol 4-LD4537 - IAN 282632 User Manual - Dutch, Danish, French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info