501140
20
Zoom out
Zoom in
Previous page
1/102
Next page
EN
8
5. Malfunctions
While an electrical fault may be a nuisance, it is never dangerous. All motors and
controls are fitted with all necessary safety devices and have double insulation.
The table below gives possible solutions to malfunctions.
If you have any doubts contact your dealer.
Cause Search Solution
Undesirable noises (bed
squeaks and creaks)
Caused by moving parts
touching each other.
Apply Teflon spray. Do
not use oil.
Undesirable noises (bed
squeaks and creaks)
The box spring is not
leveled because the floor
is not absolutely flat.
Make sure the floor is
absolutely leveled.
Undesirable noises (bed
squeaks and creaks)
The reason for this may
be a missing part, or
parts that have not been
tightened properly or
have become loose when
the bed was moved.
Tighten parts.
Undesirable noises (bed
squeaks and creaks)
The bed is not positioned
away from the wall.
Position the bed away
from the wall.
Undesirable noises (bed
squeaks and creaks)
There are unwanted
objects in the bed that
should not be there
(spoons, forks, pens,
etc.).
Remove those objects.
Sparks fly when the box
spring control system is
being plugged into the
transformer
The plug is already in the
wall socket before the
box spring control system
is connected.
First connect the box
spring control system,
then put the plug into the
socket.
Motor runs for a while
then stops
Faulty Hall sensor in
motor.
Set bed in horizontal
mode by alternately
adjusting up and down a
little at a time. Replace
motor.
Strange occurrences.
Motor does not adjust,
or only partially, etc.
Processor malfunction. Reset. Unplug the bed,
wait a short while then
plug back in.
Wrong motor engages
Wrongly installed. Install according to fitting
chart.
Nothing works
The plug is not in the
socket.
Put the plug into the
socket.
_
_0DV54_5939 BW.pdf - pag.18 February 6, 2012
LET OP !!! Lage resolutie!
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Auping AVS Boxspring at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Auping AVS Boxspring in the language / languages: English, German, Dutch, Danish, French, Swedish, Spanish as an attachment in your email.

The manual is 2,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Auping AVS Boxspring

Auping AVS Boxspring Installation Guide - English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info