705681
8
Zoom out
Zoom in
Previous page
1/10
Next page
3. Connection of Booster input (High input)
This unit can be connected to any car stereo with high level outputs, common or separated ground
outputs.
Separated ground car stereo connection; -connection car stereo speaker output cables to the high
level input connector (+) and (-), right and left polarity.
Common ground car stereo connection; -connection car stereo speakers negative output cable to
the high level input connector to the two signs(-) and the remaining cables to (+) right and left.
4. Connection of AUX input (Low input)
Connect the AUX input with RCA type pin jack as follows; white L ch pre-output of the car stereo.
Red to R ch pre-output of the car stereo.
Before connecting the pre-output of the car stereo or other unit, confirm the impedance or
sensitivity to match with this unit AUX input.
5. Input sensitivity control
Adjust the input sensitivity to output of a car stereo connected.
6. Connection of speaker (Stereo & Mono)
Connect the speaker wires as per the figure 1.2.
NOTE:
Because of high power unit, approx 20A will drained at peak power. Using the unit while the engine
is stopped may totally discharge the battery. Please run the engine in using the unit.
Because of large current flows, please use power supply cord of sufficient capacity if required.
(Larger than 3 mm square.)
This unit is designed for use with the Speakers 2-16 Ohm impedance. The speakers must have
enough capacity to accept the high power of the unit. Please carefully confirm the rating of the
speaker before connection.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Auna W2-AC600 - 10004931 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Auna W2-AC600 - 10004931 in the language / languages: English, German as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info