777171
9
Zoom out
Zoom in
Previous page
1/28
Next page
9
EN
OPERATION
Connections
Before using this unit, make sure that the AC Adaptor (21) is correct
voltage.
The unit is supplied with AMP output jacks. The AMP (20) jacks are
unbalanced and used to connect to your amplier.
The MIC L (15) and MIC R (16) input accepts a 1/4” connector.
On the rear panel are two stereo PHONO/LINE (17)(18(inputs, and 1
stereo LINE(19) inputs. The PHONO/LINE (4) enables you to set the (17)
input to phono or Line. The PHONO/LINE (6) enables you to set the (18)
input to phono or Line. The USB/LINE (8) enables you to set the input
to USB or Line (19). Headphones can be plugged into the rear panel
mounted HEADPHONE (14) jack.
Operation
POWER ON: Once you have made all the equipment connections to your
mixer, press the POWER (12). The power will turn on and the POWER
LED (22) will glow RED.
CHANNEL 1: SWITCH (4) allows you to select the PHONO 1/LINE 1 (17)
jack to input phono or line level. The CHANNEL SLIDE (5) controls the
input level of this channel.
CHANNEL 2: SWITCH (6) allows you to select the PHONO 1/LINE 1 (18)
jack to input phono or line level. The CHANNEL SLIDE (7) controls the
input level of this channel.
CHANNEL 3: SWITCH (8) allows you to select the USB OR LINE 2 (19)
jack to input phono or line level. The CHANNEL SLIDE (9) controls the
input level of this channel.
CROSSFADER: The CROSSFADER (10) allows you to the Mixing CH1/
CH2 source into another.
TALKOVER (3) The purpose of the talkover section is to allow the
program playing to be muted so that the mic can be heard above the
music. When you press the SWITCH, the talkover will be on and the
volume of all sources except the Mic inputs are lowered by 12 dB. The
Micro (2) allow you to control the level of MIC1/MIC2.
Connect your headphones to the headphones socket and select the
desired channel (channel 1-3 or MIC) for monitoring with the Cue switch
(1). With this knob PHONE (11), you can adjust the headphones volume
DISPLAY: The DISPLAY (13) indicates either the MASTER output left and
right levels.
The USB (23) jack can connect to USB stick.
|<< (24: Use this button to re-start the track or to select the previous
track.
Play/ Pause (25): Each time you press this button, the operation changes
from play to pause or from pause to play.
>>| (26): Use this button to select the next track.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Auna Pro 10032077 DJ-21 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Auna Pro 10032077 DJ-21 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info