653095
12
Zoom out
Zoom in
Previous page
1/19
Next page
12
Safety Instructions
Installation Cautions
The said product is powered via 12V and before installation, please check to ensure the voltage of the automo-
bile is correct;
In the wiring process, tear down the battery‘s negative connecting wires so as to avoid electric shock or person-
nel injury due to short-circuit;
Try not to connect wires over or near any hot surface, especially those wires connected to the engine accessories;
It is forbidden to dismantle the power cable of the said product and meanwhile, use such cable to power other
products of di erent model. Over-current is likely to lead to  re disaster;
Replace old fuse with a new one with the same speci cations;
Install the said product with supplied screws;
Bundle wires and cables together or via tapes when installation is completed;
Do not use the said product in a rainy, damp or dusty environment;
Do not install the said product in a location that vibrates or is hard to secure;
Try not to block any ventilation or radiation openings.
General Instructions
Do not modify or dismantle the said product on your own so as not to trigger any accidental events, re hazard
and electric shock;
For the sake of driving safety, try to keep the volume down;
While washing the automobile, necessary caution must be exercise as electric short-circuit or other hazards
could be set o if any water is splashed over the said product (including the speakers);
Wiring and installation are required to be performed by professionals. As skills and experience are essential
while installing the said product and connecting relevant wires and cables, it is strongly suggested to contact
relevant dealers for installation.
If detected any abnormality, please stop using the said product immediately. Otherwise, such product could be
damaged more seriously. For details, contact the corresponding professional technicians.
As the said product consists of numerous precision components, any attempt to dismantle or ad- just any
component is strictly restricted. When maintenance is needed, please send such product to the locations as
appointed by the company for maintenance.
Precaution
The said product is powered by means of a 12V AC accumulator which is grounded via the negative electrode;
Please connect as per the wiring diagram so as to avoid any device damage;
Before connection, strip o the insulation layer long as 5mm on both ends of the wires;
Do not power on until connection is  nished;
Insulate any exposed live part in order to prevent short-circuit with the automobile chassis.
Bundle all the wires and cables so as to prevent any terminals making contact with any metal object;
ATTENTION:
As for any automobile equipped with computer or satellite navigation system, the information stored
could be totally erased when the battery terminal is pulled o .
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Auna MD-160BT 10007166 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Auna MD-160BT 10007166 in the language / languages: English, German as an attachment in your email.

The manual is 2,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info