670556

Auna MC120 - 10006331 Manual

9
Zoom out
Zoom in
Previous page
1/18
Next page
9
Unit power supply (mains 230V/50Hz)
Connect the power cable plug to the (230V) wall outlet.
Warning:
Before using the unit, check that the local mains supply is compatible with the HI-FI System
(230V 50Hz).
Do not plug or unplug the power cable when your hands wet.
When planning not to use this unit for long periods of time (i.e, Vacation etc.) disconnect the plug
from the wall outlet.
When disconnecting the power cord from the wall outlet, grasp the plug; do not pull the cord in
order to avoid shock risks caused by the damaged cable.
BATTERY SAFETY PRECAUTIONS:
Keep batteries away from children and pets.
Insert the battery observing the proper polarity (+/-). Failure to properly align the battery polarity
can cause personal injury and/or property damage.
Remove spent or discharged batteries from the product. Remove the battery when the product
will not be used for extended periods of time to prevent damage due to rusted or corroded batteries
Neverthrowbatteriesintoare,Donotexposebatteriestoreorotherheatsources
Battery Disposal: Spent or discharged batteries must be properly disposed of and recycled in
compliance with all applicable laws. For detailed information, contact your local country solid
waste authority.
BATTERY BACKUP:
Two 1.5V “AA” batteries (not included) may be installed as a backup option to maintain the time
if electrical power fails. In the event of a power outage, the time will not appear on the clock LCD
Display, however the clock will continue to operate and the actual time will be maintained. The Clock
LCD Display and other functions will resume once electrical power is restored if used the backup
battery .The backup battery should be replaced as needed; Remove the battery if the clock is not
used or stored for long periods of time.
Set Clock & Alarm
TO SET THE CLOCK TIME
Switchotheitem.Thenpress and holdthebutton“TIME SET” untilthe display starts toblink
regularly. You can now choose between the 12h and the 24h modes by pressing the „FOLDER-/
HOUR“ or „FOLDER+/MIN“ buttons. By pressing the “TIME SET” button one more time you will skip
to a screen where the display is blinking and showing the time. You now can adjust the time with
thebuttons“TUNE-/Backward”and“TUNE+/Forward”.Conrmthetimebypressingthe“TIME
SET” button.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Auna MC120 - 10006331 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Auna MC120 - 10006331 in the language / languages: English, German, French as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info