Manual Auna 10040093 (page 19 of 56) (English, German, French, Italian, Spanish)

792302

Zoom out

Zoom in

1/56

OPERATING INSTRUCTIONS

Unpacking the turntable

1. Carefully remove unit from its package and take it out of the plastic

bag.

2. Remove black tie-wrap by untwisting and gently

sliding out from under tone arm.

3. Remove white protective needle cover by gently

pulling towards front of unit.

Assembling the turntable

1. Very carefully centre the vertical bearing

ceramic shaft with the vertical bearing

opening on the bottom of the turntable

platter. Lower the platter onto the ceramic

shaft while keeping the platter parallel

with the top surface of the turntable.

2. Hold the belt on the circumference of the

platter from one of the vertical bearing

openings and then place the belt onto the

pulley of the motor.

3. Put the slip mat on the turntable platter,

lining up its centre hole with the centre

spindle.

4. Insert the speaker cable ends (exposed

wires) into the terminals located on the

back of the main unit to connect the

speakers with the turntable.

Connecting the AC power cord

After connecting the speakers unwind the AC power cord fully and connect

it to any convenient household 220V~ 50Hz AC outlet.

Turntable operation

Switch the unit on by turning the POWER SWITCH (9) located on the front

panel .

1. Set the SPEED SELECTOR (7) to desire speed (33 ⅓ or 45 rpm). Place

the record on the slip mat. For 45-rpm records, place the 45 rpm

adapter on the centre spindle before placing the record on the platter.

2. Remove the tie-wrap on the tonearm and unlock it. Push the lift lever

backward to raise the tonearm and gently move the tonearm towards

the desired position over the record. Lower the tone arm by moving

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Auna 10040093 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0.46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Auna 10040093 Manual

Product: