792308
23
Zoom out
Zoom in
Previous page
1/64
Next page
23
EN
socket (14) to the auxiliary input jacks on your Hi-Fi / Amplier system
with RCA cables.
3. You may select the Phono Thru (Phono Direct) / EQ ON (via Pre-
amplier) button (12).
If set the Phono Thru / EQ ON selector (12) at EQ ON position, the
output signal will pass through the system’s built-in pre-amplier
circuit. If set the selector (12) at Phono Thru, the output signal will come
directly from the cartridge and without amplied.
4. Press the Power On/Standby (10) button to low position and the Power
LED Indicator (7) will be light up in red. Your system is now ready to
play your music. Please refer to the Operations section of this Manual
for details.
TURNTABLE OPERATION
Remove the stylus protector.
Untie the cable holding the tone arm in place, and make sure to unlock
the Tone Arm Lock (8) before operating the unit.
It is recommended to set the Phono / Line selector (12) to Phono Thru.
The Auto Stop On/O switch (6) is set in “ON” position.
1. Press the Power On/Standby (10) button to low position and the Power
LED Indicator (7) will be light up in red.
2. Set the speed selector (4) to the proper position depending on the
record to be played.
3. Place the record on the platter.
4. Set the cue lever (5) to the up position and slowly move the Cartridge
Head Shell (9) to the record side. The platter will start to rotate and
position the tone arm over the desired position of the record.
5. Pull down the cueing lever (5). The tone arm will come slowly on the
recorder and start playback.
6. At the end of record, the platter will automatically stop spinning. Lift
the tone arm from the record and return it to the rest.
7. To stop manually, lift the tone arm from the record and return it to the
rest.
Remarks
Some types of records may have an auto-stop area outside the preset
limit, so the turntable may stop before the last track nishes. In this
case, set the Auto Stop On/O switch (6) to the “OFF” position. This
allows the record to play to the end, but please note that it will not stop
automatically. You must manually raise the tone arm and place it back in
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Auna 10040060 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Auna 10040060 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info