777398

Auna 10034996 Connect Vertical Manual

72
Zoom out
Zoom in
Previous page
1/193
Next page
72
EN
AUX OPERATION
There is a “LINE IN” socket located at the left side of the unit. Analogue 
audio sound signals from other sources can be input to the unit through this
socket.
1. Connect the input to another audio device via an AUX cable (not
included) with “LINE IN” socket.
2. Press MODE repeatedly on the unit or on the remote to select AUX in
mode.
3. Press VOLUME +/- buttons on the unit or press VOL +/- on the remote
control to adjust the volume for your desired sound output level.
4. In AUX mode, operate your audio device directly for playback features.
HEADPHONE USE
Do not listen to music at high volume when using headphones. Doing so
can cause permanent hearing
impairment. Turn the tuner volume level to the lowest before using
headphones.
• Only use headphones with a 3.5-mm jack plug.
• Insert the headphone connector in the headphone socket at the left side 
of the unit.
SLEEP SETTING
This function allows you to program the unit to turn to standby mode by
itself after a set period of time.
1. To activate the sleep function, press the SLEEP button on remote control
repeatedly. The time will change in the below sequence on every press::
Sleep OFF > 15MIN > 30MIN > 45MIN > 60MIN
2. When your desired sleep time appears in the display, stop pressing the
button and the sleep function will be activated in two seconds. the moon
symbol will show on the display. Also the time remaining until switch o 
is being displayed next to the symbol in the display.
3. When the sleep timer counts down to zero, the unit will turn to standby
mode. To turn the sleep function o while the sleep timer is still counting 
down, repeat step (1)-(3) to select “SLEEP OFF”. “ ” will disappear from
the display.
4. Press the SLEEP button once to show the sleep timer status on the
display when it is turned on.
… 72 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Auna 10034996 Connect Vertical at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Auna 10034996 Connect Vertical in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 4.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info