777310

Auna 10009125 - IR-130 Manual

16
Zoom out
Zoom in
Previous page
1/26
Next page
SETTING UP
Those steps for connecting your radio to your network.
Step 1 Switching on the radio
Plug the cable from the AC adapter into the socket labeled DC on the back of the radio, then power on the
radio.
Caution: Use only the mains adapter supplied with the radio. Connecting a power supply with a different
rating will cause permanent damage to the radio and may be hazardous.
The display on the front of the radio will light up and say:
Then show
After a few seconds, it will shows :
I. If select “Yes”, it will auto scan the ESSID as
Then it will list all the ESSID names it can find, you can select one of you want to use, maybe it will request
you input the correct WEP(Wired Equivalent Privacy) or WPA(Wi-Fi Protected Access) code. If your network
is not configured to need a WEP or a WPA code, the unit will connect to the ESSID auto and success as
Or if you are requested to input the encryption, you can do as below
1. Select the one you want to use
2. Then it will show you
Note: The encryption code would have been set up by the person who set up and configured your network.
After 3 seconds the display goes into the code entry mode or press “enter”.
Please refer to the 1.2.5 to know clear of the “Remote control character list” for you to enter the passwords.
Dial the volume/select to show the code you want, press “→” button to go to the next word, press “←”
button to delete the wrong word you have entered.
3. If you complete the key then you can press “volume/select” to confirm, or use “Enter” of
remote control to confirm. The display shows “Connect WiFI” as the radio connects to the
network.
4. If the connecting is OK, it will show you
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Auna 10009125 - IR-130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Auna 10009125 - IR-130 in the language / languages: English, German as an attachment in your email.

The manual is 0.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info