777537
16
Zoom out
Zoom in
Previous page
1/20
Next page
Open/close
If the projector is the new one. Please read “projector install” chapter. Placed the projector. Connect the
powerwire and the signelwire. The operation as follow:
Open operation
1. Before use the remoter. Put in two 7 size battery in it.
2. Open the power switch on the backboard. The power
light begin to flash.
3. Press the power key on the remote control or panel.
The indicator light turn light.
4. Alter 2 second. the projector lamp begin work. began appear unclear white light on the screen.
After 2 minute projector begin work ..
5. For the new projector. When the frist time to use. maybe will appear image unclear or trapezoid
distortion . please rend “image adjustment" chapter.
6. After the image is clear. then you can watch program. during watching. you also can setup the
system parameter. please read “menu setting" chapter»
Close operation
1. During use the projector. press “power” key. can let the projector switch to situation.
2. After inter into stay situation. the projector under auto protect, auto release hot. the indicator light
is ase situation. but here. the projector is under auto protect situation. not accept any order. if
need to startup again . must wait for nished the release hot .
Image Adjustment
When you use the projector first time. It normally will appear image faintness or the image is trapezoid. It is
the reason of lens focus or trapezoid correction. Please follow the step the correction:
Focus correction
Turn the lens into the projector (1), then turn it out slowly (2), at the same time looking at the resolution
point care when the image is very clearly (take the middle area of the image), it is the best situation of the
lens.
Note: When you replace the projector from a cold to a warm environment water vapour might occur. Don't
turn the projector on when this occurs but wait until the vapour has disappeared.
Keystone correction
If a projected picture has keystone distortion, correct image with Keystone adjustment. The image becomes
trapezoid shape when the screen or project is not level. Please reposition the projector to improve its angle
to the screen. However, the circumference of the image may not be focused.
If not able to use K. correction function to correct the trapezoid distortion. Please reduce of the projector to centre the screen vertically.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Auna 10005061 EH3WS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Auna 10005061 EH3WS in the language / languages: English, German as an attachment in your email.

The manual is 2.1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info