299724
119
Zoom out
Zoom in
Previous page
1/148
Next page
SMS - Short Message Service 119
To shift the case, press the # key while entering text. For details about entering the text please see
chapter Entering a Name on page 108.
If you have an incoming call while creating a message, you can retrieve the message after answer-
ing the call. When you access the 1.Write option, if there is an unsent message the display shows
Want to edit your last message?. You can choose Yes to finish writing the message and send it.
To cancel, select No, you will be prompted to write a new message.
In some countries, you can send SMS messages to fixed line phones even if they are not fitted with
SMS capability. If your network operator fitted the line with the SMS-to-voice conversion, the mes-
sages are delivered and "read" to the addressee ad voice mail. Please contact your network oper-
ator for more details.
Message Transmission
When the message is being sent, the display shows Sending SMS and then shows Success! or
Fail! according to the sending result.
When the sending is successful
, the display shows Save Message?. Use the down or up naviga-
tion keys to highlight Yes to save the message in the outbox or No if you don't want to save it.
If the sending fails
, the display shows Fail! and than the following options:
ț Transmit Again - retries to send the message.
ț Save Message - saves the message in the Draft
N
0170333444
OK
At this step:
ț If you previously selected Enter Number,
enter the phone number to whom you want
to send the message by using the keypad.
ț If you previously selected 2.Search
Number, use the navigation keys to select
1.Dialed Call, 2.Received Call or 3.Phone-
book and press the SELECT soft key, then
select the number from the selected list by
using the navigation keys.
Press the OK soft key to confirm.
SELECT
Press repeatedly the navigation keys to
choose the operation you want to do with the
SMS message you have just typed:
ț 1.Send - sends the message immediately to
the selected destination as described in
chapter Message Transmission on
page 119.
ț 2.Save Only - saves the message in the
Draft folder without sending it. Saving SMS
will appear on the display and the message
will be saved in the Draft folder.
Press SELECT soft key to confirm the selected
operation.
If necessary, press the end/on/off key to return
to Standby mode.
Enter Number
1.Send
119


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Auerswald dect 650 c at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Auerswald dect 650 c in the language / languages: English, German as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info