611919
643
Zoom out
Zoom in
Previous page
1/701
Next page
COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 643
Service and Maintenance
Update and Provisioning
Triggering a Provisioning Test
Triggering a Provisioning Test
If you have configured automatic provisioning, and entered the address of a provisioning
server, you can check the provisioning settings, and the way the server works, by triggering a
one-time provisioning test.
You can trigger a provisioning test as follows:
Using the telephone
Using the Telephone to Trigger a Provisioning Test
Requirements:
– The PBX or telephone must be connected to a broadband Internet connection
– The address of the DNS server must be entered in Apps > Settings > Network >
Network
– Under Apps > Settings > System > Update & provisioning > Automatic
Update, enable the Check for updates check box
– On the Apps > Settings > System > Update & provisioning > Automatic provi-
sioning, enable the Automatic provisioning check box
– The address of the provisioning server must be entered under Apps > Settings >
System > Update & provisioning > Automatic provisioning
– SD card inserted into slot (min 128 MB of free memory )
Important: As soon as you tap on Provisioning test, this may delete the
existing configuration and firmware data, which will then be replaced by new
data. The telephone is restarted.
1. Tap on Apps > Settings > System > Update & provisioning.
2. Under Automatic provisioning, tap on Provisioning test.
If the update and provisioning settings for the telephone are correct, and configuration
and firmware data is present on the servers, this data is loaded onto the telephone.
The firmware is then activated by an immediate restart of the telephone.
If the update and provisioning settings for the telephone are incorrect, or no data is
present on the servers, a message that provisioning has failed is displayed in the
status line on the telephone.
Further steps:
– After a firmware update you usually require a new version of the instructions. You will find up-
to-date instructions on the Internet (see www.auerswald.de/service).
643


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Auerswald COMfortel 3600 IP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Auerswald COMfortel 3600 IP in the language / languages: English as an attachment in your email.

The manual is 3,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info