742551

Audisse Netbox Manual

14
Zoom out
Zoom in
Previous page
1/92
Next page
13
Keep network connected?
Network settings
Wlan region
Europe
Australia
SSID
Jones family
[WPS]Paul’s network
Smith
[Rescan]
SSID
[WPS]Paul’s network
Smith
[Rescan]
[Manual config]
Network wizard
Scanning...
Network settings
8. You will then need to set ‘Keep network connected’. If you need to be able to remotely control
the radio even when it has been put into standby, rotate the
TuningControlRotary
to high-
light ‘YES’ to activate this function or ‘NO’ to deactivate this function. You can also choose
to keep the network connected by using the ‘Keep network connected’ option in the network
setting menu. In the standby mode display either the WiFi signal indicator is shown with or
without a cross through it according to the chosen network settings.
9. The display will then show a list of WiFi regional options for the network set up. Rotate the
TuningControl Rotary
to highlight the required region and then press the Tuning Control
Rotary to select it. Your radio will then scan for available WiFi networks.
10. The radio will enter the Network Settings Wizard and will display ‘Scanning…’. After a short
while the display will show a list of the available WiFi networks.
11.Youwillrstneedtoidentifyyournetworkinthelistofnetworknamespresentedbythe
Network Wizard. If no networks are found then you may have to get your wireless router
working (please see the instructions supplied with it) or you may be too far from the router.
When the radio finds your wireless network, it displays the Network Name (SSID) for the
wireless access point on the screen. This is a name that is allocated to the access point in
your router by the person who set up the network – for example: ‘Jones family’ or ‘Paul’s
network’. If the router supports WiFi Protected Setup, then ‘[WPS]’ will be shown in front of
theSSID.Itispossible,andinsomelocationshighlylikely,thatyourradiowillndmorethan
one wireless network, in which case you should choose which one you need to connect to.
12. Rotate the
TuningControlRotary
to see the SSID for each wireless network that has been
found. If your network is shown proceed to step 14. If it is not shown then proceed to step
13. If you make a mistake at any point, use the Backward button to go back to the previous
screen.
13.Ifyournetworkisnotfound,itmaybebecausetherouteriscongurednottobroadcastthe
SSID. You should then use the
TuningControlRotary
to highlight and select the ‘[Manual
cong]’optioninordertoenterthenetworkdetailsmanually.Thisisdescribedin ‘Manual
NetworkConguration”.Ifyournetworknameisbeingbroadcast,anditwasnotfound,then
try re-scanning press the Backward button), and if necessary try moving your radio to a
location closer to your access point/router.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audisse Netbox at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audisse Netbox in the language / languages: English as an attachment in your email.

The manual is 5,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info