166873

Audison vrx 2 150 Manual

25
Zoom out
Zoom in
Previous page
1/36
Next page
Terminals: installation of TRM4 and TRM6
1
1
2 3 4
How to put logo in the right way in case the amplifier is mounted upside down
Plate mounting with hidden fixing screws
TRM4: mounting into VRx
A - Self-tapping screws
(Ø 4.8 mm) at sight.
- Remove the
wooden strip
1
- Remove the
wooden strip
2
1 3 4
- 23 -
5 6 7
C- MA4 screws at sight.
2
A - Self-tapping screws
(Ø 4.8 mm) at sight.
2
B - Hidden MA4 screws.
2
C- MA4 screws at sight.
2
B - Hidden MA4 screws.
2
Note: Please use the special multispanner supplied with the devices in order to carry out these operations.
TRM6: mounting into VRx
2
Controls and functions
Controls under
wooden strip
Short guide
K1 - Bal/Unbal inputs switch.
K2 - LNS circuit ON/OFF switch for line noise
suppression.
K3 - Mono/Stereo switch. In mono, the amplifier
input is the one which is commonly used for right
channel (R).
K4 - It selects sensitivity range.
LR, LL - Input sensitivities adjustment of right and
left channel respectively. When the amplifier is in
mono, adjustment is made through LR.
ON - Green led
It indicates the amplifier is on.
SAFETY - Red led
It indicates protection intervention: excessively high
temperature or output anomalies (direct current,
short circuit or dangerously low load impedance).
Protection intervention stops the amplifier
functioning. Switch the amplifier off; when anomaly is
eliminated, switch the amplifier on again.
PEAK L - R - Orange leds
They are on when one or more VRx amplifiers are
about to reach distortion threshold. They are useful to
adjust inputs sensitivity.
Controls description
Leds
Warning - When SM24, mono subsonic filter for
SUB, is employed, the amplifier cannot be used in
stereo. K3 has to be set on Mono.
Note: In case of installations with more amplifiers
connected in cascade, we recommend to put K2
onto ON in the first device (i.e. the one which
receives the signal from the head unit), leaving it
onto OFF in the others.
If disturbance persists, you can activate LNS anti-
noise circuit also in the other amplifiers.
- 46 -
VRx2.150 - VRx2.250 - VRx2.400
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audison vrx 2 150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audison vrx 2 150 in the language / languages: English as an attachment in your email.

The manual is 14,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info