165831
14
Zoom out
Zoom in
Previous page
1/18
Next page
14
LR 604
REGLER UND FUNKTIONEN
ZUSÄTZLICHER
EIGANG/AUSGANG
NORMALER
EINGANG
FUNKTION-
ANZEIGEN
ON
Leuchtet, wenn
der Verstärker
eingeschaltet ist.
SAFE
Leuchtet, wenn die
Schutzschaltungen
eingreifen: bei zu
hoher Temperatur
(oberhalb 80° C)
und Störungen an
den Lautsprecher-
Anchlüssen
(Gleichstrom,
Kurzschluß, zu
niedrige
Lastimpedanz).
Wenn die
Schutzschaltung
eingreift,
deaktiviert sich der
Verstärker.
Schalten Sie die
Anlage aus und
korrigieren Sie den
Fehler. Dann
können Sie den
Verstärker wieder
einschalten.
EMPFINDLICHKEITS
REGLER
FUNKTIONSSCHALTER
CH A
Pegelregler für
den A-Kanal des
Verstärkers.
Empfindlichkeit
von 300 mV bis
4 V einstellbar.
CH B
Pegelregler für
den B-Kanal des
Verstärkers.
Empfindlichkeit
von 300 mV bis
4 V einstellbar.
IN SELECT
IN B (A + B)
IN A - IN B
CH B
STEREO:
B-Kanäle sind in den
Stereo-Betrieb
geschaltet.
MIX MONO:
Schaltet die B-Kanäle
in den Mono-Betrieb,
die Signale beider
Eingänge werden
gemischt.
CH A
STEREO:
A-Kanäle sind in den
Stereo-Betrieb
geschaltet.
MONO IN R:
Schaltet die A-Kanäle
in den Mono-Betrieb.
Die Eingänge IN A
oder IN B werden
benutzt (siehe IN
SELECT).
IN SELECT wird auf IN B (A+B) geschaltet
IN B
Eigang wird
benutzt, um A-
und B-Kanäle
des Verstärkers
zu treiben.
IN SELECT wird auf IN A - IN B geschaltet
IN B
Eigang, um die
B-Kanäle des
Verstärkers zu
treiben.
OUT BY-PASS
Vorverstärker-
Ausgang für einen
weiteren Verstärker.
IN A
Eigang, um die A-
Kanäle des
Verstärkers zu treiben.
23
LR 604 XR
CONFIGURATION OF CONNECTING CLAMPS
CH A / HI-PASS
Left and Right power
outputs for ch A
channels (amplifier
with crossover off) or
outputs for Left and
Right HI-PASS
channels (amplifier
with crossover on ).
Ch A outputs are full
range, while HI-
PASS outputs are
selected as hi-pass
(48-4800 Hz,
adjustable ) by the
internal crossover, if
on.
OUTPUT CLAMPS
CH B / LO-PASS
Left and Right power
outputs for ch B
channels (amplifier
with crossover off)
or outputs for Left
and Right LO-PASS
channels (amplifier
with crossover on).
Ch B outputs are full
range, while LO-
PASS outputs are
selected as lo-pass
(48 - 4800 Hz,
adjustable) by the
internal crossover,
if on.
MONO
Outputs to be used
when ch A channels
(if internal crossover
is off) or HI-PASS
channels (if internal
crossover is on) are
selected as MONO
IN R through the
proper switch on the
front panel of the
amplifier.
POWER SUPPLY
CLAMPS
POWER
Input clamps for the
amplifier power supply.
Connect the battery po-
sitive and negative
according to indicated
polarities.
Applied voltage must
be between 11 and 15
VDC.
MONO
Outputs to be used
when ch B channels
(if internal crossover
is off) or LO-PASS
channels (if internal
crossover is on) are
selected as MIX
MONO through the
proper switch on the
front panel of the
amplifier.
REMOTE
IN
Turn on control for the
amplifier coming from ra-
dio-cassette player (or from
any sources provided with
remote control for
amplifiers).
Applied voltage must be
between 7 and 15 VDC.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audison lr 604 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audison lr 604 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info