Manual Audison lr 435 xr (page 15 of 18) (English, German, French, Italian)

165830

Zoom out

Zoom in

1/18

LR 435 - ANSCHLÜSSE

REMOTE

MUTE

Verbinden Sie diesen Anschluss mit

dem Anschluss Ihres Autotelefons zur

automatischen Stummschaltung von

Endverstärker.

ACHTUNG! Dieser muß eine positi-

ve Schaltspannung von 3 - 16 VDC

liefern.

Bei Eingang eines Telefongespräches

wird der Verstärker automatisch

stummgeschaltet bzw. nach

Beendigung des Gespräches wird die

vormals eingestellte Lautstärke wieder

hergestellt.

Verbinden Sie diesen Anschluss

mit dem Anschluss Ihres

Steuergerätes zur automatischen

Einschaltu von Endverstärker.

Dieser ist in der Regel, wenn

nicht gesondert gekennzeichnet

der elektronische Antennen-

anschluss. Der Endverstärkeer

arbeitet bei einer Einschalts

pannung von 3 - 16 VDC.

CH B

Lautsprecherausgang B rechts und

links.

Bitte beachten Sie die Polarität

der Lautsprecher.

CH A

Lautsprecherausgang A rechts und

links.

Bitte beachten Sie die Polarität

der Lautsprecher.

MONO

Schalten Sie den

Funktionsschalter "CH B"

auf "Mono in R".

An diesem Anschluß steht

das gebrückte Monosignal

an.

MONO

Schalten Sie den

Funktionsschalter "CH A"

auf "Mono in R" so steht an

diesem Anschluß das

gebrückte Monosignal an.

OUT

Verbinden Sie diesen Anschluss mit

dem Mute In Anschluss einer eventuell

weiteren Endstufe zur automatischen

Stummschaltung.

Die Ausgangsspannung dieses

Anschlusses beträgt 12 VDC.

Der Ausgang ist belastbar bis 5 mA.

POWER

Verbinden Sie den Plusanschluß über

die beigefügte Sicherung direkt mit

dem Plusanschluß Ihrer Autobatterie.

Den Minusanschluß verbinden Sie mit

der Fahrzeugmasse.

Beachten Sie die Be-triebssspannung

von 10-15 VDC mit negativer Masse.

Sorgen Sie für einen festen Kontakt

der Kabel.

OUT

Verbinden Sie diesen Anschluss

mit dem Remote Eingang eines

eventuell weiteren End-

verstärkers. Der Auschluss soll

den Schaltspannungs ausgang

Ihres Steuergerätes entlasten,

sowie für eine einfachere

Verkabelung sorgen.

Die Ausgangsspannung beträgt

12 VDC und ist belastbar bis

250 mA

STEREO :

A channels in ste-

reo.

CH A

MONO - IN R:

A channels in

mono. Use R input

at IN A or IN B (see

IN SELECT).

CH A (HI-PASS)

STEREO : A chan-

nels for HI-PASS

frequencies in ste-

reo.

MONO: A chan-

nels for HI-PASS

frequencies in mo-

no. R input used.

X-OVER OFF

crossover

excluded

CH B

STEREO: B

channels in stereo

MIX - MONO:B

ch an nels in m o no

m ix in g s tereo i np ut.

IN SELECT

IN B (A+B)

IN A - IN B

CH A

Level controls

for A channels.

CH B

Level control

for B channels.

HI-PASS

Level controls for

HI-PASS section

(A channels). Pro-

vided for repro-

duction of high

pass frequencies

selected by cros-

sover.

X-OVER

IN: General input

for internal cros-

sover which divi-

des audio range

into HI-PASS and

LO-PASS and di-

rects the two ban-

ds to their respec-

tive outputs.

OUT HI

HI-PASS output

leading to an

additional

amplifier.

IN A

Input for driving

amplifier's

A channels.

X-OVER ON

crossover

engaged

Lit when

amplifier is ON.

INDICATORS

LIGHTS

SENSITIVITY

CONTROLS

FUNCTION

SELECTION

GENERAL

INPUT

AUXILIARY

INPUT/OUTPUT

LO - PASS

STEREO:

Provides stereo for

LO-PASS section

of B channels

reproduciong low-

pass frequencies

coming from cros-

sover.

MIX - MONO:

Provides B chan-

nels LO-PASS

section in mono

mixing stereo

signals coming

from low pass

output of crosso-

ver.

X - OVER

OFF: Allows exc-

lusion of internal

crossover and full

range function of

2,3, or 4 channels.

ON: Engages

crossover sec-

tion dividing au-

dio range into

LO-PASS and

HI-PASS.

IN SELECT inactive

IN B

Input for driving

amplifier's

B channels.

IN SELECT positioned at IN A - IN B

IN B

Input for driving

amplifier's A

and B channels.

CROSSOVER SWITCH

AND REGULATION

IN SELECT positioned at IN B (A+B)

SAFE

When lit indicates

intervention of

protection circuits

in case of

overheating (tem-

perature exceeding

80° C 176° F) or

output trouble

(presence of

continuous current,

short circuit, or

dangerously low-

impedance load).

When protection

circuits intervene

the amplifier shuts

down.

Turn power off.

When problem is

corrected turn

amplifier back on.

LO - PASS

Level control for

LO-PASS section

(B channels).Pro-

vided for repro-

duction of low

pass frequencies

selected by cros-

sover.

X - OVER

CUT: Regula-

tes cut-off point

of LO-PASS

and HI-PASS

fre-quencies

(40 - 220 Hz).

OUT BY-PASS

Preamplified out-

put leading to an

additional am-

plifier.

LR 435 XR - CONTROLSAND FUNCTIONS

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Audison lr 435 xr in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Audison lr 435 xr Manual

Product: