483843
5
Zoom out
Zoom in
Previous page
1/36
Next page
To Set/Recall the radio presets
Press the On/off button to turn the unit on.
Press the FUNCTION button to select the Radio Mode.
Use the Tune UP or Tune DOWN button to select the desired FM station.
Press the clock set/memory button; “P01”will blink in the display.
Press the clock set/memory button again to set the preset.
Repeat steps 2 through 4 to set more presets.
The unit can preset 20 stations totally FM.
When “P01-P20” is blinking, press Tune UP or Tune DOWN to select the Preset
number.
When recalling preset stations, press Mem – up to select the Preset number.
Sleep Operation
When listening to radio or iPhone® / iPod® , press sleep button to enter sleep
mode. You can just adjust the sleep timer from 90 mins to 10 mins by pressing
the sleep button. The unit will automatically turn off after the selected time.
Press On/Off button to cancel sleep function.
AUX in
The AUX in jack can be used to playback alternate audio signal sources on the
unit speakers.
This AUX in jack requires a 3.5mm audio cable for input signal.
Note : This unit does not provide a recording signal from AUX in to the iPhon/ iPod®
.It’s purpose is to allow other types of audio devices to playback on the unit speaker.
Note : The 3.5mm audio cable is not included.
SNOOZE INFRARED SENSOR FUNCTION
In alarm On mode, use the infrared sensor to turn snooze
function On
Hand on top of sensor within 1 second snooze off for 9
minutes.
WARNING
1. No naked flame sources, such as lighted candles, should be placed on the
apparatus.
2. Do not place the product in closed bookcases or racks without proper
ventilation.
3. The mains plug will have to be easily reachable because it’s the only way to
completely turn of the CL-1461.
4. The ventilation should not be impeded by covering the ventilation openings
with items, such as newspapers, table-cloths, curtains, etc.
5. It shall not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the apparatus.
6. Do not connect FM antenna to outside antenna.
7. The unit should not be exposed to direct sunlight, very high or low
temperature, moisture, vibrations or placed in dusty environment.
8. Do not use abrasive, benzene, thinner or other solvents to clean the surface
of the unit. To clean, wipe it with mild non-abrasive detergent solution and
clean soft cloth.
9. Never attempt to insert wires, pins or other such objects into the vents or
opening of the unit.
10. Disconnect device warning: Main plug is used as the connection; so it should
always remain ready operate.
11. Batteries shall not be exposed to excessive heat such as sunshine, fire or the
like.
CAUTION
Danger of explosion if battery is incorrectly replaced
Replace only with the same or equivalent type
EN
Instruction Manual
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audiosonic CL-1461 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audiosonic CL-1461 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish as an attachment in your email.

The manual is 1,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info