483860
3
Zoom out
Zoom in
Previous page
1/76
Next page
3
SAFETY PRECAUTIONS
Read this instruction and safety manual carefully before use. Keep this manual in a
safe place for further reference.
WARNINGS
HAZARD WARNING
Risk of electRic shock do not open
CAUTION: TO MINIMISE THE RISK OF ELECTRIC SHOCK, NEVER REMOVE THE COVER.
THIS PRODUCT CONTAINS NO USER-SERVICEABLE PARTS. ONLY QUALIFIED REPAIR
TECHNICIANS SHOULD WORK ON THIS EQUIPMENTS.
THE LIGHTNING SYMBOL IN SIDE AN EQUILATERAL TRIANGLE
WARNS THE USER OF THE PRESENCE INSIDE THE PRODUCT OF
UNINSULATED HAZARDOUS ELECTRIC VOLTAGES POWERFUL
ENOUGH TO REPRESENT AN ELECTROCUTION RISK.
THE EXCLAMATION MARK SYMBOL INSIDE AN EQUILATERAL
TRIANGLE WARNS THE USER THAT IMPORTANT OPERA TING AND
SERVICING TROUBLESHOOTING INSTRUCTIONS ARE CONTAINED
IN THE DOCUMENTATION ACCOMPANYING THE PRODUCT.
HAZARD WARNING: TO REDUCE THE RISK OFFIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CLASS 1 LASER PRODUCT
This product contains a low-power emitter.
PRECAUTIONS FOR USE
To ensure safe use of this product, please follow the advice below:
Positioning
Do not use the product in extremely hot, cold, dusty or damp condition.
Place the product on a smooth, flat surface.
Do not obstruct the flow of air through the product. Place it on a well-ventilated
position; do not cover with fabric or stand on a rug or carpe t.
Power supply
Before using this product, check that its rated voltage matches your mains power
supply voltage.
Safety instructions
Never pull on the power cord when plugging in or un-plugging the product:
always use the plug pulling the cord could damage it and create a risk of electric
shock.
Unplug the product from the mains socket if you do not intend to use it for an
extended period.
The On/Off button doe s not isolate the product from the power supply. To
disconnect the product from the mains power supply, you must unp lug the
power cord.
This product should only be used in a horizontal position.
Condensation
Water droplets or condensation may from inside it is moved into a very warm,
humid atmosphere.
Condensation can cause the product to malfunction.
Leave the set in a warm room for 1 to 2 hours to allow the condensation to
evaporate.
In the event of a problem, unplug the power cord and contact a qualified repair
technician.
Ventilation precautions
Never obstruct the product's ventilation holes.
Warning concerning liquids
Do not allow liquids to splash or spill onto the product, and never stand a liquid-
filled container (vase, jar, etc.)on the top of it.
CAUTIONS
INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED. AVOID
EXPOSURE TO BEAM.
EN
Instruction Manual
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audiosonic CD-571 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audiosonic CD-571 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info