603154
9
Zoom out
Zoom in
Previous page
1/20
Next page
VIRTUALITY-Skill - DJ-dedicated MIDI controller
Page 9
English
2
(HOT CUE2) Button
: Allows you to start your track from the
CUE point set via the SET CUE button.
HOT CUE2 : Press SHIFT and HOT CUE2
simultaneously to add a second CUE point.
3
(HOT CUE3) button
: Each pressure on this button alternates
between pause and play.
HOT CUE3 : Press shift and HOT CUE3 to add a
third CUE point.
4
JOG WHEELS
Their functions depend on the current mode
(Normal, Search or Scratch).
Allow you to increase or decrease the track
speed in NORMAL mode, fast forward/backward
in SEARCH mode, and simulate a scratching
effect in SCRATCH mode.
5
PITCH CONTROL Fader
Allows you to adjust the current track speed.
6
IN(x1/2) and OUT(x2) Buttons
Allow you to create a perfect loop.
a - Press IN when playing or pausing a track to
set the starting point of your loop.
b - Press OUT to set the exit point of your
loop. The loop will then be played without any
interruption.
c - Press OUT again to exit the loop.
d - Press IN to replay the loop. This button has
no function when the starting point of the loop
has not been set. Has the same function than any
other CUE point when the exit point of the loop
has not been set.
e - Press and hold SHIFT and press IN to divide
the duration of your loop by 2.
f - Press and hold SHIFT and press IN to increase
the duration of your loop by 2.
7
SCRATCH (TAP) Button
SCRATCH: Press this button to activate the jog
wheel SCRATCH mode.
TAP: Hold SHIFT and press this button to set the
tempo manually.
8
PFL (CLONE A) Button
PFL: Allows you to select the source (CH1 and
CH2) to be monitored via your headphones. Use
the "HEADPHONE" control knob while holding
SHIFT to hear both channels simultaneously.
CLONE A: Allows you to duplicate and charge
the current track on the second channel.
9
KEY (HOT CUE) Button
KEY: Press this button to activate/deactivate the
MASTER TONE mode.
This mode allows you to maintain the tone of your
track while modifying its pitch.
HOT CUE: Allows you to go to the selected HOT
CUE (1, 2 or 3) point.
10
EFFECT (SAMPLE) Button
EFFECT: Allows you to activate or deactivate
effects. Some effects will require you to hold this
button while using them.
SAMPLE: If holding down SHIFT, allows you to
use samples (please refer to paragraphs 12 and
13 for more details).
11
FX2 Control knob
Allows you to adjust the second parameter of
effects.
NB : Please note that effects do not necessarily have 2
parameters.
12
FX1 (SAMP. VOL.) Control knob
FX1: Allows you to adjust the first parameter of
effects.
SAMP. VOL.: While holding SHIFT, allows you to
adjust the sample volume output.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audiophony SKILL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audiophony SKILL in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info