Manual Audioline V300 Watch and Care (page 25 of 32) (English, German)

619833

Zoom out

Zoom in

1/32

Registration

In delivery state the transmitter is pre−registered at the receiver. If necessary or if a another camera

is added to the system, registration can also be completed manually:

1 Switch the receiver on.

2 Press the menu key repeatedly until [C1] appears in the display.

3 Use the buttons to select the desired camera [C1] ... [C4].

4 Press the button briefly. The Link LED flickers for approx. 10 seconds. During this

time, you must perform steps 5 and 6.

5 Switch the transmitter on (switch set to ON).

6 Press the registration key on the rear of the transmitter. After a

short time the video from the transmitter will appear on the

screen if the registra tion was successful.

If the registration failed, “Out of Range“ appears on the screen.

Multi camera mode

If you registered several cameras (up to 4) to your system, you can select a single camera or switch

to scan mode. In scan mode, the signals from all activated cameras are continuously displayed alter-

nately each for about 10 seconds.

Press this button briefly. The number of the selected camera is shown.

Select another camera or the scan mode by pressing this button repeatedly.

Selecting the cameras for the scan mode

When performing the selection of the camera (see above), you can set by pressing

these buttons for each of the registered cameras, whether it should be assigned to the

scan mode (e. g. “C2 x” = not assigned to the scan mode / “C2 ✔” = assigned to the

scan mode).

For each of the four cameras you can select the features settings individually.

Operating the Receiver

PAIR

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Audioline V300 Watch and Care in the language / languages: English, German as an attachment in your email.

The manual is 0,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Audioline V300 Watch and Care Manual

Product: