501038

Audioline TERMINAL 2 Manual

57
Zoom out
Zoom in
Previous page
1/64
Next page
- Private exchanges -
57
6 Using with private exchanges
The AUDIOLINE TERMINAL 2 does not have an R signal button as this function is
implemented via the menu control.
Warning! We recommend that the private exchange is always set up without automatically
obtaining an outside line, as otherwise it will be impossible to make internal calls.
6.1 Consultation
If you want to consult another party while a call is being made, proceed as follows:
1. While the first call is being made, the display will show the message "2. Call ?". Now press
the OK button.
2. You will hear a dialling tone and can enter the required internal phone number. The first
call will be put on hold and you will be able to talk to the second party. While the second
call is being made, the message "Toggle ?" will appear in the display.
3. If you now want to end the call and return to the first party, select the "Disconnect"
function by pressing the
button twice.
4. The current call will be ended by pressing the OK button and you will return to the first
call.
6.2 Consultation and forwarding
If you want to forward a call with previous consultation to another internal party, proceed as
follows:
1. While the first call is being made, the display will show the message "2. Call ?". Now press
the OK button.
2. You will hear a dialling tone and can enter the required internal phone number. The first
call will be put on hold and you will be able to talk to the second party.
3. Now replace the receiver or press the handsfree button and the call will be forwarded.
6.3 Direct forwarding
If you want to forward a call directly to another internal party, proceed as follows:
1. While the first call is being made, the display will show the message "2. Call ?". Now press
the OK button.
2. You will hear a dialling tone and can enter the required internal phone number.
3. Now replace the receiver or press the handsfree button and the call will be forwarded.
WARNING! If this method of forwarding a call does not work with your private exchange,
please use the "Forward" function via the menu.
… 57 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audioline TERMINAL 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audioline TERMINAL 2 in the language / languages: English, German as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info