501028

Audioline TEL4CLIP Manual

17
Zoom out
Zoom in
Previous page
1/24
Next page
17
2.7 PROGRAMMING STANDARD SETTINGS
Telephone numbers are always shown in the display with
the local dialling code or, in the case of international calls,
also with the appropriate country code. If these numbers
are dialled directly from the caller list, the dialling code can
of course be omitted with local calls. Therefore, you should
enter your local dialling code and the country code for
Germany (0049). Moreover, you can also enter the date
and time at this point.
1. Lift the receiver.
2. Press and hold the
and buttons for 4
seconds.
3. The display will show “-----, local dialling code”. Now
enter your local dialling code with a maximum of 5
digits.
4. Press the
button as many times as necessary
until you see the message “country code” in the
display. If a 5 digit local dialling code is entered the
display jumps directly to the next entry “country code”.
5. Now enter the country code 0049 for Germany.
6. Press the
button as many times as necessary
until you see the message “TIME? DATE?” in the
display. Now enter the current hour between 00 and
23 using the
and buttons and confirm with
the
button.
7. Now enter the current minute between 1 and 59 using
the
and buttons and confirm with the
button.
8. Now enter the current day between 1 and 31 using the
and buttons and confirm with the
button.
9. Now enter the current month between 1 and 12 using
the
and buttons and confirm with the
button.
Important information!
If you ever have to change the standard settings, start
programming as described under item 1. You can now
move the flashing cursor to any number using the
button and make a change using the
and buttons.
You can automatically go from the local dialling code to the
country code and to the time entry by repeatedly pressing
the
button. To shorten a local or country dialling
code, go to after the end of the numbers you have entered
(cursor flashes) and then use the
and buttons to
enter the minus sign “-“.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audioline TEL4CLIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audioline TEL4CLIP in the language / languages: English, German as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info