501026

Audioline TEL49 CLIP Manual

28
Zoom out
Zoom in
Previous page
1/40
Next page
- Setting up -
28
Note: If you ever have to change the local or national dialling code at a later
date, start programming by pressing the keys simultaneously. You can
move the flashing cursor to the desired position by means of the delete button
. You can now change the selected number with the buttons. In order
to delete a number altogether, enter a minus sign (-) using the
buttons.
3.8 Setting the display contrast
If the display cannot be seen clearly, you can adjust the display contrast to suit
the lighting conditions. The display contrast can be adjusted in three steps by
means of the “CONTRAST” slide switch on the right-hand side.
3.9 Private exchanges - T-NET set-up
You can use the “R” signal button on your telephone on private exchanges and
when using DEUTSCHE TELEKOM’s T-Net functions. If you use neither a
private exchange or the T-NET-functions of the DEUTSCHE TELEKOM, no
adjustments must be made here.
Private exchanges
If you have connected your telephone to a private exchange, you can use all
the facilities such as call transfer, automatic recall, etc. The “R” signal button
gives you access to these facilities. The FLASH time “100ms” (factory setting)
will be required on a private exchange. To make this setting, move the slide
switch on the right side to the “100ms” position. You can find out from the
dealer from whom the equipment was purchased whether your telephone will
work on your private exchange without any problems and which other facilities
you will have access to.
T-NET functions
Your telephone supports the most important DEUTSCHE TELEKOM added
value services (e.g. brokering, call waiting, three-way conferencing, etc.).
Please contact DEUTSCHE TELEKOM to gain access to these functions
(some of which are subject to charge). When using T-NET functions, move the
slide switch on the right side to the “300ms” position.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audioline TEL49 CLIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audioline TEL49 CLIP in the language / languages: English, German as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info