501413
46
Zoom out
Zoom in
Previous page
1/76
Next page
- Operation -
46
4 Operation
4.1 The display
In the normal operating mode, the display shows the name of the handset. The pre-set name
can be changed at any time. For more information, refer to 9.7. In addition, the main functions
are shown in the display by means of various symbols.
Lit: You are making a call.
Lit: You are making an external call.
Flashing: You are receiving an external call.
Lit: You are making an internal call.
Flashing: You are receiving an internal call.
Lit: You are in the caller list (CLID).
Flashing: There are new calls stored in the caller list (CLID).
Lit: This number in the caller list is a missing call.
Lit: This number in the caller list was already taken.
Flashing: Please charge the handset.
Lit: Indication of battery capacity
Cycling through of the segments: The handset is being charged.
Lit: When the phone book is being used.
Lit: Whenever programming is activated.
Lit: The keypad lock is activated.
Lit: The connection to the base station is satisfactory.
Flashing: Base station out of range.
W X
Lit: The number is longer than 12 digits.
4.2 Receiving calls
When a call arrives, the ringing tone sounds on the handset and on the base station. The
handset will ring a little later than the base station due to the radio transmission. The message
EXT. will flash in the display. Press the call button
on the handset and the connection will
be made. The call indicator on the base station will flash during the call.
Note: While the handset is ringing, you can adjust the ringer volume by means of the
and
buttons.
To end the call, replace the handset in the base station or press the call button
on the
handset.
Notes: Please refer to Chapter 6 for information on how to show the caller's number in the
display. When the automatic call accept feature is selected, the call is automatically accepted as
soon as you lift the handset from the base station. You can find out in Chapter 9.50 how to
switch the automatic call accept feature on or off.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audioline STUDIO 80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audioline STUDIO 80 in the language / languages: English, German as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info