501415
52
Zoom out
Zoom in
Previous page
1/66
Next page
56
PABX and Supplementary Services
52
9 PABX and Supplementary Services
Private branch exchanges
PABX access code (number for an outside line)
In the case of private branch exchanges, it is necessary to dial a specific number (e.g. 9" or
0") in order to obtain the dialling tone for an outside line. If the number for an outside line has
been stored and activated in the handset, this number is automatically dialled prior to phone
numbers from the phone book or calls logs.
Dialling pause
In the case of private branch exchanges it is necessary to enter an access code prior to the
phone number to get an outside line with its corresponding dialling tone. When using some
older private branch exchanges, it takes a little time before the dialling tone becomes audible.
In the case of such private branch exchanges, a dialling pause can be inserted after the
number for an outside line in order to continue dialling directly without having to wait for the
dialling tone.
2 sec £ Insert the dialling pause
P" appears in the display. After dialling the number for the outside line, the phone then waits 3
seconds before dialling the actual phone number.
The pause can also be entered with the phone numbers in the phone book.
R button with private branch exchanges
If the phone is connected to a private branch exchange, functions associated with the R but-
ton, such as transferring calls and automatic call back, can be used. Please refer to the oper-
ating manual provided with your private branch exchange to determine which Recall time must
be set to be able to use the functions. The dealer where you purchased the exchange can pro-
vide information as to whether the phone will work properly with the exchange.
Setting the recall time Page 54
Recall time (Flash time)
In order to operate the phone within a private branch exchange, set a Recall time of 100 ms.
Page 54
Supplementary services
Caller number display (CLIP
2
)
If this function is available on your telephone line, the number of the caller appears in the dis-
play immediately the phone rings. Chapter 7
If the caller has suppressed transfer of his phone number, the corresponding message ap-
pears in the display. In this case, the phone number is not displayed and, as a result, is not
stored in the calls list.
The caller number display function is an optional service offered by telephone net-
work providers.
Contact your network provider for further information.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audioline Studio 80 Quadro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audioline Studio 80 Quadro in the language / languages: English, German as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info