501415

Audioline Studio 80 Quadro Manual

43
Zoom out
Zoom in
Previous page
1/66
Next page
39
40
41
Telephoning
43
Muting the microphone in the handset
The microphone in the handset can be activated and deactivated during a telephone con-
versation.
This enables you to confer with a third party, for example, without the caller being able
to hear you. The handset loudspeaker, however, remains on; i.e. you can still hear the
caller.
Switch the microphone on/off (muting)
Displaying the duration of a call
A few seconds after a telephone conversation begins, the display automatically stops showing
the caller number and displays the duration of call in hours, minutes and seconds instead.
Range
The handset has a range of approx. 50 meters in closed rooms and approx. 300 meters out-
doors.
In the case of a good connection to the base station, the
icon appears continuously in the
display.
If the handset is moved too far from the base station, the icon flashes and acoustic warning
signals are issued.
Move towards the base station, otherwise the call will be disconnected.
Key lock
Calls can still be taken in the normal way even when the key lock function is activated.
3 sec * Activate the key lock function
* * Deactivate the key lock function
Locating the handset (Paging)
If you have mislaid the handset, it can be located easily by means of an acoustic signal.
The search tone rings for 30 seconds and is then switched off automatically. During this
period, all the handsets registered on the base station ring.
{«} Activate the acoustic signal to locate the handset
or © Stop the acoustic search tone (prematurely)
Switching a handset on/off
3 sec R Switch the handset on/off
Dialling mode
The telephone can be operated in analogue exchanges (PULSE mode) as well as in a new,
digital exchanges (TONE/DTMF mode).
Setting the dialling mode Page 54
Temporary tone dialling
If you only operate the telephone using the PULSE dialling mode, you can still make use of the
advantages of TONE dialling mode (e.g.: for remote access to the answering machine in the
telephone network). You can switch to Tone dialling mode temporarily when a connection has
been established.
4 sec * Press the button for 4 second during a call
Switch to Tone dialling mode
When the call is ended, the equipment automatically switches back to Pulse dialling mode.
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audioline Studio 80 Quadro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audioline Studio 80 Quadro in the language / languages: English, German as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info