619902
40
Zoom out
Zoom in
Previous page
1/48
Next page
SMS − Text Messages
40
10 SMS − Text Messages
Conditions for using SMS
The telephone connection must be equipped with the CLIP
1
feature. Con-
tact your telephone network provider to ensure this feature is enabled on
your telephone connection. To use the SMS
2
service, your telephone net-
work provider must enable it.
A text cannot be sent from every private branch exchange extension.
If you want to send SMS text messages from a private branch ex-
change extension, it is necessary to store the number for an out-
side line for your PBX in the handset preceding the Service Cen-
tre number.
Sending SMS messages is not available for Call−by−Call connections
at present.
Charges are made for sending SMS texts.
If the recipient in the conventional telephone network does not use an
SMS service or his telephone is not basically equipped to handle SMS
messages, the SMS is automatically converted to a voice message.
Costs are charged by your telephone network provider.
SMS service centre
SMS messages are distributed via a Service Centre. If you want to send
SMS text messages, you must program a service centre number in your
handset Page 14. Please contact the provider of your choice for the
necessary service centre call numbers and the procedure for enabling the
SMS service.
Your telephone has already been prepared to send SMS text
messages. Service centre numbers are already programmed in
the handset. Activate the required Service Centre in the SMS
menu Page 14.
SMS centre 1 SMS centre 2
Deutsche Telekom: 0193 010 Anny Way: 0900 32 66 900
Entering text
The digit keys are also labelled with letters for the entry of the respective
text. Letters, digits and special characters are entered by pressing the
relevant key the respective number of times. Please refer to Menu Struc-
ture for a description of navigation for writing texts Page 14.
Switch between upper and lower case
Clear
Delete the last character entered
Press and hold
Clear
Delete the entire text
SMS text templates
There are 5 pre−programmed text templates available Page 14.
SMS alert signal (alarm)
An acoustic signal is issued when a new SMS text message is received.
The signal can be activated or deactivated via the menu. Refer to Page 14
for the sequence of menu option selections.
Service−Hotline Germany: Tel. 0180 5 001388 (cost via Telekom at time of going to print: 14 ct/min)
1
CLIP: Calling Line Identification Presentation = Display the caller’s
phone number.
2
SMS: Short Message Service = Service for sending text messages.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audioline Slim DECT 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audioline Slim DECT 500 in the language / languages: English, German as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info