Manual Audioline PMR Easy 009 (page 23 of 32) (English, German)

500937

Zoom out

Zoom in

1/32

- Operation -

3.4.1 Changing the call code (CTCSS)

Normally, all calls on the selected channel are sent to all radios that

are in receiving range. You may therefore also hear calls that are not

intended for you when other people are using radios on the same

channel in the vicinity. In order to prevent this, it is possible to define a

call code. Check between yourselves which code has been selected.

1. Press the MODE button twice. The CODE indicator and the

current call code will flash in the display.

2. A new code between 01 and 38 can now be selected using the

and buttons. If the code -- is selected, all calls will be

made on the selected channel.

3. Confirm the selection with the talk button on the left-hand side.

Radio 1

Radio 2

Note: The selected channel and the call code must correspond for

you to be able to talk to one another.

3.5 Calling another subscriber

When you want to talk to other subscribers, proceed as follows: The

two radios must be switched on and set to the same channel and to

the same call code.

Press the small CALL button once. A ringing tone will sound on the

called unit for two seconds. Now wait until the person called answers.

To speak yourself, press the talk button. Hold the unit about 5 cm from

your mouth and speak in a normal voice. When you have finished,

release the talk button. The person you are speaking to will hear a

brief noise when you release the call button. This will indicate to the

other party that you have finished speaking and are waiting for a reply.

However, in spite of this, we recommend that you finish your message

with the word "End" so that the person you are calling knows exactly

when he can reply.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Audioline PMR Easy 009 in the language / languages: English, German as an attachment in your email.

The manual is 0,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Audioline PMR Easy 009 Manual

Product: