501382
54
Zoom out
Zoom in
Previous page
1/60
Next page
− Troubleshooting
54
14 Troubleshooting
Should problems arise with the telephone, refer to the following information first.
Faults
Corrective measures
No telephone calls possi-
ble
The telephone line is not connected properly or is defective.
Only use the telephone connection cable supplied.
Test whether the telephone connection is in order by using
another telephone.
The power adaptor plug is not plugged in or there is a com-
plete power failure.
The rechargeable standard batteries are empty or defective.
The handset is too far from the base station.
Connection is disturbed or
cut off
The handset is too far from the base station.
The base station is in an unsuitable location.
Dialling not possible Dialling mode is set incorrectly.
The system no longer re-
sponds or is in an undefi-
ned state
Reset the default settings (refer to Section 13.1). Before
doing so, disconnect the power adapter plug briefly from the
power socket.
The charging control lamp
does not light up
Place the handset correctly in the base station, clean the
contact surfaces on the handset and the base station with a
soft, dry cloth.
The battery icon flashes in
the display after a few
hours
Place the handset in the base station for 14 hours. If this
does not help, replace the rechargeable batteries.
Display is dark Caused by exposure to direct sunlight.
Allow the handset to cool down.
The caller number display
(CLIP) does not function
The caller number display function is an optional service
offered by telephone network providers. Contact your net-
work provider for further information.
The caller has suppressed the transmission of their phone
number.
An "F" appears in the
7−segment display.
The answering machine memory is full Delete messages
from the memory.
The answering machine
does not take any calls
Ensure that the answering machine is connected correctly
and switched on.
Check whether the answering machine memory is full. De-
lete messages from the memory, if necessary.
No memo can be recorded Check whether a memo has already been recorded. Delete
the old memo, if necessary.
Check whether the answering machine memory is full. De-
lete messages from the memory, if necessary.
No remote access func-
tions can be executed
Check that the correct security code has been entered for
the remote access.
The telephone used for remote access must be set to Tone
dialling (DTMF).
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audioline Oslo 282 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audioline Oslo 282 in the language / languages: English, German as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Audioline Oslo 282

Audioline Oslo 282 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info