501362

Audioline Master 300 Manual

41
Zoom out
Zoom in
Previous page
1/48
Next page
− Multiple Handsets −
41
11.4 Registering and deregistering handsets
11.4.1 Registering more AUDIOLINE Oslo 200 handsets
3 sec Initiate the registration facility by pressing the Paging
button on the base station
After pressing the Paging button, the handset registration process must be completed
within the following 90 seconds:
y Open the REGISTER menu
yz Select the REG BASE function and confirm
ë Enter the number of the base station (1 to 4) and confirm
the input
If the handset is already connected to a base station, the corresponding number
flashes.
A search is then made for the base station.
When the base station is found, proceed as follows:
ë Enter the PIN (default setting: 0000) and confirm the input
{í}
The handset is then registered.
The handset is assigned an internal call number. The handset already registered has
the internal call number 1. The second handset registered is assigned the internal call
number 2. The internal call number appears in the right of the display when in Standby
mode.
11.4.2 Registering DECT−GAP handsets from other manufacturers
In order to register a DECT−GAP handset from another manufacturer, follow the instructions in the
operating manual provided by the original manufacturer and then press the Paging button
on your base station for 3 seconds. Use the PIN to register (default setting: 0000).
11.4.3 Deregistering handsets
A handset can only be deregistered by another handset still registered. It is not possible to com-
plete the deregistration using the handset which is to be deregistered.
zz Open the SETUP menu.
yz Select the DEL HANDSET menu and confirm.
ë Enter the PIN (default setting: 0000) and confirm the input
{í}
Press the button to cancel the process.
ë Enter the internal call number of the handset to be
deregistered and confirm the input. {í}
11.5 Additional base stations
The range of the handset can be increased by using several base stations. To implement the func-
tion, all the base stations must be connected to a telephone line connection. Depending on the
intended use, each base station can be assigned the same telephone number or each can be as-
signed a different call number. Pay attention that all the base stations overlap with regard to their
range.
The handset must be registered on each base station.
Please test the range of the handset before starting up a new base station. If a handset is regis-
tered on the base station and the automatic base station dialling function has been activated on
the handset (refer to Section 7.5), the handset is always automatically transferred to the next base
station.
11.5.1 Selecting a base station
y Open the REGISTER menu
yz Select the SELECT BASE function and confirm
All the base stations to which the handset is already registered appear in the display.
The number of the base station currently active flashes.
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audioline Master 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audioline Master 300 in the language / languages: English, German as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info