501362

Audioline Master 300 Manual

30
Zoom out
Zoom in
Previous page
1/48
Next page
− Telephoning −
30
5.1 Taking a call
{ì} and {í}, Take the call
End the call
When the handset is ringing, press the y or z button to adjust the ringing vol-
ume.
If the ringing tone has been deactivated on the handset, incoming calls are only indi-
cated by the base station (as long as Tone dialling mode has not been deactivated).
5.2 Handsfree
Use this function to telephone with your hands free.
Switch the function on or off during a call
5.3 Taking two calls
You will hear acoustic signals (call waiting) if a second call is received while you are talking on the
telephone. The number of the second caller appears in the display. Press the buttons below in
the sequence described to switch between the two callers, the connection to the other caller is
put on hold.
R, 2 Switch to the other caller
Caution: The functions for phone number display, holding calls and call waiting are
supplementary services offered by your telephone network provider. Contact your net-
work provider for further information.
To use the supplementary services offered by Deutsche Telekom, set the Recall
(Flash) time to 300 ms.
5.4 Making a call
ë Enter the phone number (max. 32 digits)
Dial the phone number
If you enter a wrong digit:
Press briefly: Deletes the last entry.
2 sec Press longer: Deletes the entire phone number.
It is also possible to press the Call button first to obtain the dialling tone for an outside line.
Then enter the required telephone number. It is not possible to correct wrong digits individually
using this dialling procedure.
5.5 Dialling pause
In the case of private branch exchanges, it is necessary to dial a specific number (e.g. 9" or 0")
in order to obtain the dialling tone for an outside line. When using some older private branch ex-
changes, it takes a little time before the dialling tone becomes audible. Particularly in the case of
such private branch exchanges, it is useful to insert an automatic pause after the number for the
outside line so that the number can be dialled in a continuous process without having to wait for
the dialling tone.
Between pressing the number for an outside line and the phone number required, press the £
button once. P" appears in the display. After dialling the number for the outside line, the telephone
then waits 3 seconds before dialling the actual phone number.
The pause can also be entered with the phone number in the phone book.
5.6 Redialling
The telephone stores the last ten numbers dialled in a redialling list.
£ Open the redialling list (the last phone number dialled
appears in the display)
y or z, Select an entry and dial the number
If a phone number has been stored in the phone book, the name associated with it ap-
pears in the display.
5.6.1 Deleting all the numbers from the redialling list
£ Open the redialling list
2 sec
, Delete the entire list
5.6.2 Deleting a number from the redialling list
£ , y or z Select the entry to be deleted
, Delete the individual entry
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audioline Master 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audioline Master 300 in the language / languages: English, German as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info