501361

Audioline ISDN Terminal 500 Manual

65
Zoom out
Zoom in
Previous page
1/92
Next page
55
56
PABX / Supplementary Services
65
7 PABX / Supplementary Services
Public access (incoming code)
When the telephone is used in private branch exchanges, it is necessary to dial
an access code
Incoming Code in order to obtain a dialling tone. Refer to
Page 69 for the sequence of option selections. If the number for an outside line
(public access) has been stored and activated in the handset, this public access
number is automatically dialled prior to phone numbers from the phone book or
calls lists.
Automatic ECT
1
When the Automatic ECT function is activated, dialling is completed using
the ISDN ECT" feature, otherwise Disconnect" is used on both connections.
Refer to Page 69 for the sequence of option selections.
Automatic keypad
The
Automatic Keypad
function enables certain features to be controlled by
entering sequences of characters or digits (e.g. on PBX systems, too). The Key-
pad" function must be set when the ISDN Terminal 500 is connected to an ISDN
telephone system or an exchange which is controlled by Keypad" protocol. In
this case, the digits/characters 0−9, *, # are transmitted as keypad information
elements. Refer to Page 69 for the sequence of option selections.
Calling Line Identification Presentation (CLIP
2
)
The caller number display (CLIP) function is a supplementary service
offered by telephone network providers. Contact your network provider
for further information.
If this function is available with your telephone line, the number of the caller ap-
pears in the display when the phone rings. If the caller has suppressed transmis-
sion of his phone number, the corresponding message appears in the display. As
a result, the phone number is not displayed and is not stored in the call lists.
1
ECT: Explicit Call Transfer = Call transfer
2
CLIP: Calling Line Identification Presentation = Display the caller’s phone number
Service−Hotline Germany: Tel. 0180 5 001388 (cost via Telekom at time of going to print: 12 ct/min)
… 65 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audioline ISDN Terminal 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audioline ISDN Terminal 500 in the language / languages: English, German as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info