501326
66
Zoom out
Zoom in
Previous page
1/72
Next page
- Multiple handsets -
66
9.4.3 Logging on a handset to another DECT/GAP base station system or a third
party base station
1. Prepare other base station
Follow the operating instructions indicated under 'Logging on additional handsets' of the
base station you would like to log on to.
2. Logging on the DECT8049 handset
Proceed as described above from point 2., but use the PIN code of the base station you
would like to log on to (instead of 0 0 0 0).
9.4.4 Logging off handsets
A handset can only be logged off using another handset that is still logged-on. It is therefore
not possible to carry out the logging-off procedure using the handset that is to be logged off.
1. Press the Menu display button on the mobile unit.
2. Select the Registration menu with and and confirm with OK.
3. Select the De-register menu with and and confirm with OK.
4. Now enter the PIN code of the base station (factory setting 0 0 0 0) and confirm with
OK.
5. Now select with and the number 1, 2, 3, 4 or 5 of the mobile unit to be
logged off and confirm with the OK button. You can abort the process by pressing
the button. If the logging-off is successful, after a few seconds you will hear a
signal tone. The mobile unit is now logged off and can no longer be used for
external and internal calls.
9.5 Additional base stations
You can increase the range of the handsets by using several base stations. In order to
make use of this effect, all base stations must be connected to a telephone socket.
Depending upon the application, you can allocate the same telephone number to each base
station or you can give the base stations different numbers. Make sure that the ranges of all
base stations overlap. Each handset must be logging on to each basis station. Please test
the range of the handsets before putting a new base station into operation.
If a handset is logged on to the base station and if the automatic base station selection is
activated (further information in this chapter), the handset is always forwarded automatically
to the nearest base station. Current calls cannot be transferred from one base station to
another.
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audioline DECT8049 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audioline DECT8049 in the language / languages: English, German as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info