501324
66
Zoom out
Zoom in
Previous page
1/80
Next page
- Advanced Functions -
66
8.12 Restoring the default settings
This function resets the handset and base station settings to their status on leaving the factory. The phone book,
caller list (CLIP) and all phone numbers in the redialling list are deleted.
Default settings:
Language: English
Name of handset: DECT8048
Battery warning tone: On Automatic answering: On
Range warning signal: On External ringing melody: 3
Key tone: On Internal ringing melody: 1
Receiver volume: 3 Ringing volume, handset: 3
Pin code: 0000 Ringing melody, base station: 2
Pause : 3 sec. Ringing volume, base station: 3
Dialling method: DTMF/Tone Recall (Flash) time: 100 ms
1. Press the Menu button B.
2. Use
D and E to select the SETUP menu and confirm by pressing B.
3. Use
D and E to select the DEFAULT function and confirm by pressing B.
4. Enter the PIN code (default setting 0000) via the digit keys and confirm by pressing
B. The message
CONFIRM? appears.
5. Confirm by pressing the Menu button
B.
6. The default settings are restored after a short time. The display then indicates the equipment is ready to
operate.
Note: If you forget the PIN code, you can reset the default settings without the PIN code.
1. Remove the battery from the handset.
2. Press and hold the
* button and insert the battery again. Press and hold the * button until DEFAULT
appears in the display.
3. Confirm by pressing
B and the default factory settings are reset. The process can be cancelled at any
time by pressing the
F button.
8.13 Registering and deregistering handsets
A further handset can be registered on the base station. The maximum number of registrations is 4 handsets or 3
handsets and 1 alarm unit.
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audioline DECT 8048-SOS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audioline DECT 8048-SOS in the language / languages: English, German as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info