501302
62
Zoom out
Zoom in
Previous page
1/80
Next page
- T-NET/Private exchanges -
62
8 T-NET mode / Private exchanges
You can use the "R" signal button (INT) on your telephone on private exchanges and
when using DEUTSCHE TELEKOM's T-Net functions.
8.1 "R" Button on Private Exchanges
If you have connected your telephone to a private exchange, you can use all the facilities
such as call transfer, automatic recall, etc. The "R" signal button gives you access to
these facilities. The FLASH time "100ms" will be required on a private exchange. You can
find out from the dealer from whom the equipment was purchased whether your
telephone will work on your private exchange without any problems. Due to the large
number of different private exchanges, it is not possible to guarantee this function.
8.2 "R" Button and the DEUTSCHE TELEKOM T-Net
Your AUDIOLINE telephone supports the most important DEUTSCHE TELEKOM added
value functions (e.g. brokering, call waiting, three-way conference, etc.). The T-NET
works using the "FLASH 300ms" setting. Please contact DEUTSCHE TELEKOM to gain
access to T-Net functions.
8.3 Setting the FLASH time
1. Press the button.
2. Select the Setup menu by pressing and confirm with .
3. Select the Recall function by pressing and confirm with
4. Select Recall 1 (100ms) or Recall (300ms) with and and confirm with
.
5. Exit the entry mode by holding the
/
button pressed.
8.4 Outside line code
With private exchanges, it is necessary to dial a certain number (e.g. "9" or "0") in order
to obtain a dialling tone for an outside line on the extension. With some, older private
exchanges, it takes some time before the dialling tone can be heard. Especially for these
private exchanges, an automatic pause can be inserted after connecting to the outside
line so that you can dial directly without waiting for the dialling tone. Two different
outside line codes can be entered.
Special note: If you have not connected your telephone to a private exchange or if your
private exchange works without a pause or without connecting to an outside line, please
do not enter any settings in this area.
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audioline DECT 5600 SMS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audioline DECT 5600 SMS in the language / languages: English, German as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info