501275
32
Zoom out
Zoom in
Previous page
1/44
Next page
25
26
27
28
Telephoning
32
Holding a call / brokering
While a call is in progress, it is possible to dial another handset in order to
consult with someone. The external caller is put on hold while you con-
verse with the second, internal person called. You can switch between the
callers as often as necessary.
HS1:
Int
, + or ,
e.g.
Handset 2
,
Ok
Dial the internal call number during the
conversation with the external caller
HS2: Take the internal call on the other
handset
HS1:
Brok
Change back and forth between the
callers
Conference calls
An external call can be transferred to another internal handset for a confe-
rence call.
HS1:
Int
, + or ,
e.g.
Handset 2
,
Ok
Dial the internal call number during the
conversation with the external caller
HS2: Take the internal call on the other
handset
HS1:
Conf
Start the conference
At this point, you can switch between the two callers as neces-
sary and then back to the conference.
HS1/HS2: The conference is terminated by one of
the internal handset users ending the call
Adjusting the receiver volume
The volume can be adjusted to one of 5 settings during a call.
+ or , Select the required volume
Talk time display
The duration of a received call is displayed in hours, minutes and seconds
during the call.
Handsfree
This function is used to listen to the caller via the loudspeaker.
Activate handsfree mode
Deactivate handsfree mode
Muting the microphone in the handset
The microphone in the handset can be activated and deactivated during a
telephone conversation.
C Deactivate the microphone (muting
function activated)
C Activate the microphone
Key lock
3 sec Á Activate the key lock function
Incoming calls can still be taken in the normal way even when the
key lock function is activated.
3 sec Á Deactivate the key lock function
Handset ringing melody
The ringing melody on the handset can be switched off.
3 sec Ë Deactivate the ringing melody
The ringing tone setting on the base station remains unaffected.
3 sec Ë Activate the ringing melody
Searching for the handset (Paging)
If you have mislaid your handset, you can locate it again with the aid of a
search tone.
{«} Activate the search tone
or End the search tone
Switching the handset on and off
You can switch the handset off in order to save the batteries.
2 sec
Switch off HS?
Yes
or
No
Confirm or cancel the function
2 sec Switch the handset on
Service−Hotline Germany: Tel. 0180 5 001388 (cost via Telekom at time of going to print: 14 ct/min)
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audioline CUT 80x at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audioline CUT 80x in the language / languages: English, German as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info