500947

Audioline Baby Care 1 Manual

16
Zoom out
Zoom in
Previous page
1/20
Next page
- Operation -
16
4 Operation
4.1 The baby unit
Position the baby unit near to the baby. Please observe the minimum distance of one metre. For best
transmission, the integral microphone (6) should be pointing towards the child.
Now select one of the two channels A or B with the channel switch (3).The parent and baby units must
be set to the same channel.
Switch on the baby unit by moving the slide switch (1) to the ON position. The baby unit is now ready for
use. In the ON position, the baby unit is always in operation. The in-built microphone will continuously
transmit any noises made by your child.
You can switch the night light on and off by means of the Night light button (5).
In battery mode, the indicator light (4) shows green when there is sufficient battery capacity. You should
change the batteries if the indicator light shows red. When used with the power supply, the indicator light
always shows red.
To switch off the baby unit, move the slide switch (1) to the OFF position.
Reducing radiation/Battery saving mode
Move the slide switch (1) to the AUTO position. With this setting, the baby unit will only transmit when
noises are received. This reduces radiation, as the baby unit will only transmit when the baby makes a
noise. Furthermore, in battery mode, the life of the batteries will be increased.
Note:
Check that both units are working properly each time before using.
When using the AUTO function, check whether the noises made by the baby are loud enough to initiate
a transmission.
4.2 The parent unit
Position the parent unit near to you. The parent unit has a rotating belt clip. If the belt clip is turned
downwards, you can place the parent unit on a flat surface. If the belt clip is turned upwards, you can fix
the parent unit to your belt and thus have it with you at all times. You can also hang up the parent unit in
any convenient place using the clip.
Now select one of the two channels A or B with the channel switch (8).The parent and baby units must
be set to the same channel. Switch on the parent unit by turning the slide switch (7) to the ON position.
The parent unit is now ready for use. Set the required volume with the slide switch (7). The volume
becomes louder in the ON direction and reduces in the OFF direction.
In battery mode, the indicator light (10) shows green when there is sufficient battery capacity. You should
change the batteries if the indicator light shows red. When used with the power supply, the indicator light
always shows red.
To switch off the parent unit, move the slide switch (7) to the OFF position.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audioline Baby Care 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audioline Baby Care 1 in the language / languages: English, German as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info