500969
26
Zoom out
Zoom in
Previous page
1/34
Next page
Operation
26
4 Operation
Using the default outgoing message
If you have not recorded an outgoing message, the answering machine automatically plays the de
fault outgoing message. The default message can have a male or female voice. To select between a
male and female voice, press the REC/x button twice in short succession.
Wording of the default outgoing message: “Bitte hinterlassen Sie Ihre Nachricht nach dem Ton.”
Recording an outgoing message
1. Press and hold the x/REC button. An acoustic signal is issued.
2. The message ANSAGE AUFNEHMEN appears in the display.
The outgoing message must be at least 3 seconds long and not longer than 60 seconds.
The length of the outgoing message is deducted from the maximum recording time. When
your outgoing message is 18 seconds, for example, then 49 minutes and 42 seconds re
main for incoming messages.
3. Speak your outgoing message into the microphone.
Keep a distance of about 15 cm from it.
4. To end recording, simply release the REC/x button.
5. The outgoing message is automatically played back and the message ANSAGE ABSPIELEN
appears in the display. The volume can be adjusted by pressing the two arrow keys y and
z.
You can play back your outgoing message at any time by pressing the REC/x button briefly.
Deleting your own outgoing message and reverting to the standard message
1. Press the REC/x button.
2. Press the button while the outgoing message is being played back.
Your outgoing message is deleted. The next time a call is received, the answering machine plays the
default outgoing message.
Setting the number of rings
On the rear side of the answering machine is a sliding switch (2 6 TS). Set the sliding switch to the
number of times the answering machine should ring before it takes a call.
Position
Significance
2 The call is taken after two rings.
6 The call is taken after six rings.
TS The first call is taken after six rings and all the other calls after two rings. This switch
position can be used to implement the toll-saving remote access function. Details are
provided in the Chapter “Free of charge pre-remote access”.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audioline AB 880 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audioline AB 880 in the language / languages: English, German as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info