500962
27
Zoom out
Zoom in
Previous page
1/30
Next page
Remote Access
27
5 Remote Access
Remote access enables the answering machine to be contacted from any telephone which uses
tone dialling in order to listen to messages received and execute other functions.
Access code for remote access
The answering machine is provided with a personal identification number (remote access code) so
only you can listen to incoming messages via the remote access feature. The remote access code is
a three−digit number and is located on the underside of the unit.
Free of charge pre−remote access
The toll−saving pre−remote access feature can be used to check whether messages have been re-
ceived on your answering machine from a distant telephone.
On the rear side of the answering machine is a sliding switch (2 6 TS). Set the sliding switch to TS".
On contacting your answering machine from an external telephone, the answering machine re-
sponds as follows:
S If your call is taken after 2 rings, there are new messages on the answering machine.
S If there are no new messages on the answering machine, your call is not taken after two rings.
Replace the receiver after the third ring. Since the answering machine is activated after the sixth
ring, no charge will be made for the call.
Remote access options
1. Call your own phone number and wait for the answering machine to take the call.
2. While the outgoing message is being played, enter the three−digit remote access code using the
dialling keys on the phone.
3. Entry of the correct code is confirmed by two acoustic signals.
4. Press one of the key combinations below to select the respective function.
Replace the receiver to end the remote access function.
If there is a pause in excess of 7 seconds between function selections, the line is automati-
cally disconnected.
During playing messages
Play newly recorded messages Press key sequence 2" and 5"
Play all recorded messages Press key sequence 2" and #"
Delete current message Press key sequence 3" and #"
Repeat playback of previous message Press key sequence 6" and #"
Skip current message Press key sequence 7" and #"
Repeat current message Press key sequence 8" and #"
27


Need help? Post your question in this forum.

Forumrules
1

Forum

audioline-ab-820

Reset search

  • I am endeavoring to obtain two outgoing/incoming cassette tapes for the Audio line 830 answering machine Submitted on 28-3-2017 at 04:31

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audioline AB 820 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audioline AB 820 in the language / languages: English, German as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info