501048
11
Zoom out
Zoom in
Previous page
1/47
Next page
- Normal Use -
56
4 Normal use
4.1 The display
The display is provided with an automatic backlight, which illuminates the display for ca.
8 seconds every time a button is pressed. In normal operation, the display shows the
name of the handset. The default name can be changed at any time; see 9.8.
The display also gives a symbolic display of all the main functions.
Steady: You are making (or taking) a call.
Blinking: There is an incoming call and the connection with the base station is
being established.
Steady: You are making (or taking) an external call.
Blinking: There is an incoming external call.
Steady: You are making (or taking) an internal call.
Blinking: There is an incoming internal call.
Steady: A conference call has been set up.
Steady: You are in the callers (CLIP) list.
Blinking: New calls have been stored in the CLIP list.
Blinking: Batteries low. Please recharge handset.
Steady: Indicates battery charge level.
Steady: Shows phonebook is in use.
Steady: Shows programming has been activated.
Steady: Handsfree facility has been activated.
4.2 Taking calls
If you receive an incoming call, both the handset and the base station will emit a ring
tone. Because of the time required to establish a connection, the handset rings slightly
later than the base station.
Notice: While the handset is ringing you can use the
and buttons to adjust the
ring volume.
The EXT indication in the display will blink. Press the call button,
, on the handset to
take the call. The call indicator on the base station will blink during the call.
To end the call, replace the handset on the base station or press the call button,
, on
the handset.
You will find information on the display of telephone numbers in chapter 5.
When automatic answering is switched on, the call will be automatically taken as soon as
you lift the handset from the base station. To find out how to turn on the automatic
answering function, see chapter 9.6.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audioline 5800TECH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audioline 5800TECH in the language / languages: English as an attachment in your email.

The manual is 1,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Audioline 5800TECH

Audioline 5800TECH User Manual - German - 47 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info