Manual Audio-Technica M3 - Wireless In-Ear Monitor System (page 7 of 118) (English, German, Dutch, French, Italian, Portuguese, Spanish)

704640

Zoom out

Zoom in

1/118

To access the M3T Stereo Transmitter’s user-changeable functions,

Touch the Mode/Set button. The top line of the transmitter display

shows “FREQ”. Touch the Down arrow button to scroll through the

functions that may be changed. Note that for Frequency, Trim, RF

Power, HP Out, the display’s lower line indicates the current setting

for the given function.

To change a transmitter function, when the function to be edited is

displayed, touch the Mode/Set button. The small word “EDIT” will flash

in the display. Touch the Up/Down arrow buttons to scroll through the

available choices for the function, stopping on the desired choice. Hold

the Mode/Set button to accept the new choice. “STORED” appears in

the display when the choice is accepted. The transmitter then returns to

Menu mode. Continue this process until all desired function-setting

changes are complete. Note: To escape from Edit mode without

making any changes, touch the Mode/Set button. “ESCAPE”

appears briefly in the display, and the transmitter returns to

Menu mode.

How to make setting changes on the M3T Stereo Transmitter

M3T Stereo Transmitter Functions

Function Menu Default Value Choices (Edit) Wrap-around*

st Frequency Lowest in band Over 1250 discrete frequencies Yes

st Group G1 - 1 G1 – G6 (16 channels each) Yes

st User U1 - 1 U1 – U3 (16 channels each) Yes

st Trim 0 0 – Unlimited No

st RF Power High Low, Off, High Yes

st HP Out (Headphones Output) Stereo Stereo, L/R Mix Yes

st Program - Create custom frequency groups

st Reset - Choose OK to restore factory settings

st Quit (exit Menu) QUIT Press Mode/Set once to exit

* Continue in the same Up/Down direction and choices “wrap around” to the other end of the range.

Frequency (Transmitter)

Permits manual selection of a frequency. See How to Select a

Frequency, page 11.

Group (Transmitter)

Permits selection of frequency groups with pre-coordinated channels.

There are six frequency groups, each offering 16 pre-coordinated

channels. See How to Select a Frequency, page 11.

User (Transmitter)

Permits selection (optional) from among three user-created frequency

groups. See How to Select a Frequency, page 11.

Trim (Transmitter)

Controls level of both inputs (L/1 and R/2). Trim levels are set at the

factory to the maximum position (0); adjust if necessary. See Setting

Levels, page 12.

RF Power Adjustment (Transmitter)

Allows you to set RF power to RF HI, RF LOW or RF OFF. The default

setting is RF HI. When the setting you prefer is shown, Hold the

Mode/Set button. The RF OFF option allows the user to change to an

approved frequency without transmitting a frequency that might dis-

turb existing wireless users in a festival or other crowded-RF setting.

Note: To power on the M3T Transmitter in the RF OFF mode, depress

the M3T power switch and Down arrow button simultaneously;

“RF OFF” will flash on the LCD. See Power switch, page 5. To re-

sume transmission of RF, you must change the menu setting to

RF HI or RF LOW as described above.

Headphones Output (Transmitter)

Allows you to switch headphones output between Mix and Stereo. In

the Stereo setting, the L1 signal goes to the left earphone; the R2

signal goes to the right earphone. In the Mix setting, a combined signal

from both the L/1 and R/2 inputs goes to both earphones. When the

setting you prefer is shown, Hold the Mode/Set button.

Program (Transmitter)

In the event that the preprogrammed frequency groups (available under

the Group menu) do not meet your requirements, Audio-Technica

allows you to program custom frequency groups. See How to Select a

Frequency, page 11.

Reset (Transmitter)

Allows you to reset all transmitter functions to their factory-default

values. Hold the Mode/Set button while “RESET” is displayed in the

LCD window. At the prompt “OK?” hold the Mode/Set button again.

Factory-default settings will be restored.

Quit (Transmitter)

To exit the Edit mode, press the Down arrow until “QUIT” is displayed

in the LCD window. Then press the Mode/Set button once to exit the

menu. The “AF” scales will reappear in the window, indicating the

return to normal operation.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Audio-Technica M3 - Wireless In-Ear Monitor System in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Audio-Technica M3 - Wireless In-Ear Monitor System Manual

Product: