704598
16
Zoom out
Zoom in
Previous page
1/19
Next page
15
Troubleshooting
When the connection codec is AAC, significant sound delays can be alleviated by changing the connection codec to SBC,
which comes standard with Bluetooth devices.*
1
Connecting to an SBC priority connection
When the pairing with a Bluetooth device has been completed
1. Turn on the product.
2. With music or video paused, cover the 3 points on the touch panel with your palm
as shown in the figure. Continue touching the touch panel even after the noise-
cancelling function turns on or off (keep your hand in place for about 5 seconds).
Once the multi-indicator lamp has flashed in white 2 times, the multi-indicator
lamp will begin to flash as follows: a quick, white light followed by a 3-second
interval, indicating the settings are complete.
After the settings are complete, the Bluetooth device that was paired will be
automatically connected.*
2
Before pairing with a Bluetooth device
1. Turn on the product.
2. With the multi-indicator lamp showing the searching for device status, cover the 3 points on the touch panel with
your palm as shown in the figure. Continue touching the touch panel even after the noise-cancelling function turns
on or off (keep your hand in place for about 5 seconds).
The multi-indicator lamp will turn off and then light in white. After that, it will switch to flashing in white.
3. While the multi-indicator lamp continues to flash in this manner (two white flashes followed by a 0.5-second
interval), refer to steps 2 and 3 in “Pairing a Bluetooth device” (p.7) to perform the pairing operation.
The multi-indicator lamp will flash (a single, quick white flash followed by a 3-second interval) when the settings
are complete.
After pairing via an SBC priority connection is complete, the only available connection codec will be SBC.
Connections using other codecs will not be possible.
For details about the multi-indicator lamp’s flashing and lit displays, refer to “Multi-indicator lamp
display”(p.16).*
3
*1 Depending on the usage environment, changing to an SBC priority connection may not alleviate sound delays.
*2 If the product does not connect automatically, refer to “Pairing a Bluetooth device” (p.7), and do the procedures for pairing again.
*3 Turning the power off and then back on will result in a return to a normal connection and will enable connections using other codecs.
Perform the operations for an SBC priority connection each time it is necessary.
SBC priority connections (for when sound is delayed significantly)
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audio-Technica ATH-ANC700BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audio-Technica ATH-ANC700BT in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Audio-Technica ATH-ANC700BT

Audio-Technica ATH-ANC700BT User Manual - German - 19 pages

Audio-Technica ATH-ANC700BT User Manual - Dutch - 19 pages

Audio-Technica ATH-ANC700BT User Manual - French - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info