704637
7
Zoom out
Zoom in
Previous page
1/15
Next page
6
Preparation for use
Tonearm balance and tracking force
In order for the cartridge to reproduce audio correctly from the record’s
grooves, the tonearm’s balance and tracking force must be adjusted
to fit the specifications of the cartridge. If the tonearm’s balance and
tracking force are not properly adjusted, the record or the cartridge’s
stylus may become damaged.
Do not drag the cartridge’s stylus across the record or turntable mat
when adjusting the tonearm’s balance or tracking force. Doing so
may damage the stylus.
Setting tonearm balance
1. Remove the cartridge’s protector.
2. Unlock the tonearm and lift the tonearm lift control lever.
The tonearm is tilted because the balance has yet to be adjusted.
3. Place the tonearm over the platter. Hold the headshell and lower
the tonearm lift control lever completely.
Protect the stylus from touching platter.
4. While still lightly holding the headshell, turn the counterweight to
adjust the tonearm’s balance.
Adjust the balance so that the tonearm is level when you release the
headshell.
5. Return the tonearm to the tonearm rest.
Setting tracking force
1. While supporting the counterweight so that it does not move,
turn the tracking force gauge ring so that its “0” position lines up
with the centerline on the back of the tonearm.
The tracking force is not adjusted simply by turning the tracking force
gauge ring.
2. Turn the counterweight and the tracking force gauge ring
together counterclockwise from the 0 position (to the left) until
the centerline value matches the recommended tracking force
value for the cartridge you are using.
Refer to the cartridge maker’s specifications for the recommended tracking
force value.
The tracking force value for the cartridge provided with this product is 2.0 g.
Setting the anti-skate adjustment
While the record is playing, a force acts on the stylus tip to pull it
inward. This force can be counteracted by setting the same values for
anti-skate and the tracking force.
1. Adjust the anti-skate control dial to have the same value as the
tracking force value.
The tracking force value for the cartridge provided with this product is 2.0 g.
0.5
2.5
0
2.5
1.5
2
TonearmCounterweight
Adjust so that tonearm is level
Centerline
Tracking force
gauge ring
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audio-Technica AT-LPW40WN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audio-Technica AT-LPW40WN in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Audio-Technica AT-LPW40WN

Audio-Technica AT-LPW40WN User Manual - German - 15 pages

Audio-Technica AT-LPW40WN User Manual - Dutch - 15 pages

Audio-Technica AT-LPW40WN User Manual - French - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info